Daniele da Volterra (1509–1566) – skazany na wielowiekowe pośmiewisko

Daniele da Volterra, Dawid i Goliat, Galleria Nazionale d’Arte Antica, Palazzo Barberini

Daniele da Volterra, Dawid i Goliat, Galleria Nazionale d’Arte Antica, Palazzo Barberini

Artysta ten zapamiętany został z pracy, która nie przyniosła mu ani sławy, ani poklasku. Jednak jako malarz, sztukator i rzeźbiarz pozostawił po sobie kilka wybitnych dzieł, które przez dwa stulecia ściągały do Rzymu wielbicieli sztuki z całej Europy. Dziś widzimy w nim jedynie naśladowcę Michała Anioła, a także jego profanatora. I choć opinia ta powoli ulega zmianie, nadal nie do końca potrafimy docenić jego twórczość. Dlaczego? Gdyż znacząca część jego spuścizny została zniszczona i bezpowrotnie utracona.  

Daniele da Volterra, Dawid i Goliat, Galleria Nazionale d’Arte Antica, Palazzo Barberini
Portret Daniele da Volterry, zdj. Wikipedia
Daniele da Volterra, Zdjęcie z krzyża, kaplica Bonfil, kościół Santa Trinità dei Monti
Daniele da Volterra, Wniebowzięcie Marii, kaplica della Rovere, kościół Santa Trinità dei Monti
Daniele da Volterra, Wniebowzięcie Marii, fragment, kaplica della Rovere, kościół Santa Trinità dei Monti
Daniele da Volterra, Prezentacja Marii w Świątyni, kaplica della Rovere, kościół Santa Trinità dei Monti
Popiersie Michała Anioła, Daniele da Volterra, Galleria dell’Accademia di Firenze, Firenze
Kaplica Ricci, kościół San Pietro in Montorio
Daniele da Volterra, Posąg św. Piotra, kaplica Ricci, kościół San Pietro in Montorio

Artysta ten zapamiętany został z pracy, która nie przyniosła mu ani sławy, ani poklasku. Jednak jako malarz, sztukator i rzeźbiarz pozostawił po sobie kilka wybitnych dzieł, które przez dwa stulecia ściągały do Rzymu wielbicieli sztuki z całej Europy. Dziś widzimy w nim jedynie naśladowcę Michała Anioła, a także jego profanatora. I choć opinia ta powoli ulega zmianie, nadal nie do końca potrafimy docenić jego twórczość. Dlaczego? Gdyż znacząca część jego spuścizny została zniszczona i bezpowrotnie utracona.  

 

Urodził się w toskańskim miasteczku Volterra (stąd jego przydomek) jako Daniele Ricciarelli. Pierwsze nauki pobierał najprawdopodobniej pod okiem dwóch zdolnych uczniów Rafaela – Sodomy i Baldassare Peruzziego. Wraz z tym ostatnim podążył na początku lat trzydziestych XVI wieku do Rzymu, aby wziąć udział w pracach przy dekoracji Palazzo Massimo alle Colonne. Po śmierci Peruzziego pozostał w   mieście nad Tybrem, które oferowało młodemu artyście liczne możliwości. Zapisał się do Akademii św. Łukasza i zaczął nawiązywać kontakty z działającymi tam twórcami, w tym z Perinem del Vega (również uczniem Rafaela).  Decydującym momentem w jego artystycznym życiu było jednak spotkanie z cieszącym się sławą największego artysty wszech czasów – „boskim” Michałem Aniołem. Zrodziła się między nimi przyjaźń, a niepewny siebie, melancholijny, powolny i wciąż poszukujący drogi Daniele znalazł w podobnie jak on skrytym mistrzu prawdziwe wsparcie. Ten dostarczał mu rysunków, udzielał rad, a przede wszystkim pośredniczył w zleceniach. Zapewne za jego sprawą papież Paweł III powierzył artyście z Volterry stanowisko superintendenta mającego doglądać prac malarskich w pałacu Apostolskim, w tym dekoracji sławnej Sala Regia.

Przełomowe w karierze da Volterry było jednak pozyskanie zlecenia w kościele Santa Trinità dei Monti. Wykonane tam przez niego bogate sztukaterie, ale przede wszystkim wspaniałe freski, zachwyciły wszystkich.

W latach pięćdziesiątych, być może pod wpływem i wrażeniem Michała Anioła, da Volterra coraz częściej sięgał po dłuto, dając dowód swych wszechstronnych umiejętności. Niestety, i one, podobnie jak wspomniane wcześniej freski, uległy w dużej części zniszczeniu.

W 1564 roku da Volterra wraz z Tommaso Cavalierim czuwał przy łożu umierającego Michała Anioła. Zachował się jego wzruszający list skierowany do Giorgia Vasariego (jego kronikarza), opisujący smutek z powodu śmierci „mistrza i ojca”, która pozbawiła go na zawsze – jak pisze – „słodyczy życia i rady”. Na życzenie rodziny stworzył jego pośmiertną maskę oraz popiersia w brązie. Przybity śmiercią swego protektora i przyjaciela zamieszkał w jego skromnym rzymskim mieszkaniu nieopodal forum Trajana.




Sobór w Trydencie, którego obrady (po prawie 20 latach) dobiegły końca w 1563 roku, wyznaczył nowe trendy, nie tylko w nauczaniu Kościoła, ale też w sztuce. Od tej pory miała być ona tworzona w duchu kontrreformacji. Wszelka nieprzyzwoitość, a za taką uznano przedstawienia nagich postaci, powinny zniknąć z wnętrz sakralnych. Dzieła religijne miały inspirować do umartwiania, pokuty i modlitwy. Papiestwo stanęło w tym momencie przed dylematem: jak wytyczne te pogodzić z dziełami już znajdującymi się, i to w samym sercu Kościoła, w miejscu najbardziej reprezentacyjnym i sławnym z rozlicznych dzieł sztuki – w Kaplicy Sykstyńskiej z wykonanym przez Michała Anioła Sądem ostatecznym. Przypomnijmy, że krytyka tego dzieła, choćby ze strony Pietra Aretina, rozpoczęła się już w momencie jego odsłonięcia w 1541 roku. Jednak żaden z kolejnych papieży nie reagował na nią, nawet surowy Paweł IV. Dopiero rok po śmierci Michała Anioła kolejny papież, Pius IV, w obliczu toczących się dyskusji i postanowień soboru, nakazał zakryć nieprzyzwoitą goliznę postaci na wielkim malowidle. Dzieła tego podjąć się miał nie kto inny, jak wciąż opłakujący swego mistrza Daniele da Volterra. Od tego momentu zaskarbił sobie niechęć kolegów, ale też prześmiewczy przydomek „Braghettone” (majtkarz). Zapewne wbrew sobie malarz zabrał się do dzieła, skuwając nagie członki i piersi namalowane przez Michała Anioła i nakładając na nie nowe freski z wymyślnymi majtkami, przepaskami i szarfami. Z rozkazu papieża skuł też jedną scenę szczególnie rażącą oczy współczesnych. Był to święty Błażej nachylający się ku pochylonej przed nim nagiej świętej Katarzynie Aleksandryjskiej, która jakby zaskoczona odwraca głowę w kierunku „napastującego” ją świętego. Katarzyna „ubrana” została przez malarza w zieloną szatę, natomiast Błażej zmienił kierunek swego spojrzenia: od tej pory spogląda w przeciwną stronę – ku Chrystusowi.

Obrońcy da Volterry podkreślali jego kunszt i powściągliwość w zakrywaniu intymnych części bohaterów malowidła, które i tak poddane by zostały – w razie jego odmowy – retuszom przez kogoś innego. Twierdzili, że w ten sposób uratował dzieło, któremu groziło nawet całkowite skucie. Co powiedziałby na to Michał Anioł? Możemy przypuszczać, że nie zgodziłby się na taką interwencję, żywiąc przekonanie, że piękne nagie ciała same w sobie są emanacją Boga, ale... czy możemy mieć taką pewność?




Prace nad retuszowaniem Sądu Ostatecznego przerwane zostały w momencie śmierci Piusa IV (grudzień 1565) – należało zdemontować rusztowanie w kaplicy szykowanej na kolejne konklawe. Daniele da Volterra już do nich nie powrócił – zmarł kilka miesięcy później.

Ukończona w latach dziewięćdziesiątych XX wieku, trwająca prawie dwie dekady konserwacja fresków Michała Anioła w Kaplicy Sykstyńskiej doprowadziła do zdjęcia licznych domalówek (temperą), wykonanych w XVI i XVII wieku przez kontynuatorów dzieła da Volterry. Te wykonane przez niego zdecydowano się jednak zachować. Tak więc stał się on poniekąd współtwórcą wielkiego malowidła.

Prace Daniele da Volterra w Rzymie:

  •     Freski ukazujące historię Fabio Massima, Palazzo Massimo alle Colonne, 1535
  •     Freski w kaplicy Orsini – obecnie Cappella Bonfil (niezachowane, oprócz Zdjęcia z krzyża), 1546; freski w kaplicy della Rovere (Wniebowzięcie Marii, Prezentacja Marii w świątyni), 1550, kościół Santa Trinità dei Monti
  •     Dekoracje w Palazzo Farnese (Stanza del Cardinale), 1549
  •     Sztukaterie i freski w pałacu Apostolskim, Sala Regia, 1547
  •     Dawid i Goliat, 1550, Galleria Nazionale d’Arte Antica, Palazzo Barberini
  •     Święty Jan Chrzciciel, Pinacoteca Capitolina (przypisywane)
  •     Święta Rodzina z Janem Chrzcicielem, ok. 1560, Galleria Doria Pamphilj
  •     Freski w kaplicy del Crocifisso (św Łukasz i św. Mateusz) wg kartonów Perina del Vegi, kościół San Marcello
  •     Freski w nawie głównej bazyliki San Giovanni in Laterano
  •     Posąg Archanioła Michała w portalu zamku Sant’Angelo, 1556 (niezachowany)
  •     Posąg św. Piotra, 1559–1568, kaplica Ricci, kościół San Pietro in Montorio
239.35msRequest Duration16MBMemory UsageGET article/{id}/{slug?}Route
    • Booting (138.67ms)
    • Application (182.05ms)
      8 templates were rendered
      • pages.article (resources/views/pages/article.blade.php)6blade
        Params
        0
        article
        1
        photos
        2
        relatedArticles
        3
        relatedArticlesPhotos
        4
        categoryName
        5
        parentCategoryId
      • components.main-nav (resources/views/components/main-nav.blade.php)13blade
        Params
        0
        obLevel
        1
        __env
        2
        app
        3
        categories
        4
        settings
        5
        menu
        6
        errors
        7
        article
        8
        photos
        9
        relatedArticles
        10
        relatedArticlesPhotos
        11
        categoryName
        12
        parentCategoryId
      • components.category-banner (resources/views/components/category-banner.blade.php)13blade
        Params
        0
        obLevel
        1
        __env
        2
        app
        3
        categories
        4
        settings
        5
        menu
        6
        errors
        7
        article
        8
        photos
        9
        relatedArticles
        10
        relatedArticlesPhotos
        11
        categoryName
        12
        parentCategoryId
      • components.breadcrumbs (resources/views/components/breadcrumbs.blade.php)1blade
        Params
        0
        breadcrumbs
      • pages.sections.articleHeading (resources/views/pages/sections/articleHeading.blade.php)13blade
        Params
        0
        obLevel
        1
        __env
        2
        app
        3
        categories
        4
        settings
        5
        menu
        6
        errors
        7
        article
        8
        photos
        9
        relatedArticles
        10
        relatedArticlesPhotos
        11
        categoryName
        12
        parentCategoryId
      • components.check-also (resources/views/components/check-also.blade.php)13blade
        Params
        0
        obLevel
        1
        __env
        2
        app
        3
        categories
        4
        settings
        5
        menu
        6
        errors
        7
        article
        8
        photos
        9
        relatedArticles
        10
        relatedArticlesPhotos
        11
        categoryName
        12
        parentCategoryId
      • index (resources/views/index.blade.php)13blade
        Params
        0
        obLevel
        1
        __env
        2
        app
        3
        categories
        4
        settings
        5
        menu
        6
        errors
        7
        article
        8
        photos
        9
        relatedArticles
        10
        relatedArticlesPhotos
        11
        categoryName
        12
        parentCategoryId
      • components.footer (resources/views/components/footer.blade.php)20blade
        Params
        0
        obLevel
        1
        __env
        2
        app
        3
        categories
        4
        settings
        5
        menu
        6
        errors
        7
        article
        8
        photos
        9
        relatedArticles
        10
        relatedArticlesPhotos
        11
        categoryName
        12
        parentCategoryId
        13
        filesVersion
        14
        __currentLoopData
        15
        lang
        16
        loop
        17
        segments
        18
        url
        19
        baseUrl
      uri
      GET article/{id}/{slug?}
      middleware
      web
      controller
      App\Http\Controllers\ArticlesController@index
      namespace
      App\Http\Controllers
      prefix
      null
      where
      as
      article
      file
      app/Http/Controllers/ArticlesController.php:82-170
      205 statements were executed, 85 of which were duplicated, 120 unique100.2ms
      • select * from `articles_categories` where (`parent_id` is null and `status` = 'ACTIVE')3.6msbaza5943_roma
        Metadata
        Bindings
        • 0. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')360μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '1' and `lang` = 'pl'1.77msbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 1
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '1' and `status` = 'ACTIVE')530μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')710μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '2' and `lang` = 'pl'350μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 2
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '2' and `status` = 'ACTIVE')5.86msbaza5943_roma
        Metadata
        Bindings
        • 0. 2
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')1.86msbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '3' and `lang` = 'pl'3.21msbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 3
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '3' and `status` = 'ACTIVE')640μsbaza5943_roma
        Metadata
        Bindings
        • 0. 3
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')630μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '4' and `lang` = 'pl'890μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 4
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '4' and `status` = 'ACTIVE')800μsbaza5943_roma
        Metadata
        Bindings
        • 0. 4
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')330μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '5' and `lang` = 'pl'350μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 5
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '5' and `status` = 'ACTIVE')620μsbaza5943_roma
        Metadata
        Bindings
        • 0. 5
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')360μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '8' and `lang` = 'pl'350μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 8
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '8' and `status` = 'ACTIVE')430μsbaza5943_roma
        Metadata
        Bindings
        • 0. 8
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')390μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '9' and `lang` = 'pl'380μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 9
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '9' and `status` = 'ACTIVE')390μsbaza5943_roma
        Metadata
        Bindings
        • 0. 9
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')350μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '10' and `lang` = 'pl'430μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 10
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '10' and `status` = 'ACTIVE')340μsbaza5943_roma
        Metadata
        Bindings
        • 0. 10
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')240μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '11' and `lang` = 'pl'430μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 11
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '11' and `status` = 'ACTIVE')420μsbaza5943_roma
        Metadata
        Bindings
        • 0. 11
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')400μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '12' and `lang` = 'pl'330μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 12
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '12' and `status` = 'ACTIVE')430μsbaza5943_roma
        Metadata
        Bindings
        • 0. 12
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')300μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '13' and `lang` = 'pl'310μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 13
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '13' and `status` = 'ACTIVE')310μsbaza5943_roma
        Metadata
        Bindings
        • 0. 13
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')310μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '14' and `lang` = 'pl'290μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 14
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '14' and `status` = 'ACTIVE')310μsbaza5943_roma
        Metadata
        Bindings
        • 0. 14
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')300μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '15' and `lang` = 'pl'290μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 15
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '15' and `status` = 'ACTIVE')420μsbaza5943_roma
        Metadata
        Bindings
        • 0. 15
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')410μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '16' and `lang` = 'pl'410μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 16
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '16' and `status` = 'ACTIVE')370μsbaza5943_roma
        Metadata
        Bindings
        • 0. 16
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')340μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '17' and `lang` = 'pl'430μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 17
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '17' and `status` = 'ACTIVE')370μsbaza5943_roma
        Metadata
        Bindings
        • 0. 17
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')330μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '18' and `lang` = 'pl'350μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 18
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '18' and `status` = 'ACTIVE')350μsbaza5943_roma
        Metadata
        Bindings
        • 0. 18
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')340μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '19' and `lang` = 'pl'350μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 19
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '19' and `status` = 'ACTIVE')350μsbaza5943_roma
        Metadata
        Bindings
        • 0. 19
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')360μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '20' and `lang` = 'pl'360μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 20
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '20' and `status` = 'ACTIVE')360μsbaza5943_roma
        Metadata
        Bindings
        • 0. 20
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')330μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '21' and `lang` = 'pl'310μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 21
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '21' and `status` = 'ACTIVE')440μsbaza5943_roma
        Metadata
        Bindings
        • 0. 21
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')340μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '22' and `lang` = 'pl'390μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 22
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '22' and `status` = 'ACTIVE')340μsbaza5943_roma
        Metadata
        Bindings
        • 0. 22
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')360μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '23' and `lang` = 'pl'420μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 23
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '23' and `status` = 'ACTIVE')380μsbaza5943_roma
        Metadata
        Bindings
        • 0. 23
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')360μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '24' and `lang` = 'pl'360μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 24
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '24' and `status` = 'ACTIVE')400μsbaza5943_roma
        Metadata
        Bindings
        • 0. 24
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')350μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '25' and `lang` = 'pl'360μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 25
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '25' and `status` = 'ACTIVE')330μsbaza5943_roma
        Metadata
        Bindings
        • 0. 25
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')340μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '26' and `lang` = 'pl'420μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 26
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '26' and `status` = 'ACTIVE')350μsbaza5943_roma
        Metadata
        Bindings
        • 0. 26
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')340μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '27' and `lang` = 'pl'410μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 27
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '27' and `status` = 'ACTIVE')790μsbaza5943_roma
        Metadata
        Bindings
        • 0. 27
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')690μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '28' and `lang` = 'pl'350μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 28
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '28' and `status` = 'ACTIVE')340μsbaza5943_roma
        Metadata
        Bindings
        • 0. 28
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')360μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '29' and `lang` = 'pl'370μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 29
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '29' and `status` = 'ACTIVE')400μsbaza5943_roma
        Metadata
        Bindings
        • 0. 29
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `settings`430μsbaza5943_roma
        Metadata
        Hints
        • Use SELECT * only if you need all columns from table
        • The SELECT statement has no WHERE clause and could examine many more rows than intended
      • select * from `articles` where `id` = '423' and `articles`.`deleted_at` is null590μsbaza5943_roma
        Metadata
        Bindings
        • 0. 423
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles')430μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '2' and `entity_id` = '423' and `lang` = 'pl'310μsbaza5943_roma
        Metadata
        Bindings
        • 0. 2
        • 1. 423
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '3' and `entity_id` = '423' and `lang` = 'pl'730μsbaza5943_roma
        Metadata
        Bindings
        • 0. 3
        • 1. 423
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '6' and `entity_id` = '423' and `lang` = 'pl'370μsbaza5943_roma
        Metadata
        Bindings
        • 0. 6
        • 1. 423
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `urls` where `table` = 'articles' and `entity_id` = '423'380μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        • 1. 423
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `articles`.`id` = '423' and `articles`.`deleted_at` is null limit 1330μsbaza5943_roma
        Metadata
        Bindings
        • 0. 423
        Hints
        • Use SELECT * only if you need all columns from table
        • LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
      • select `articles_categories`.*, `articles_categories_join`.`article_id` as `pivot_article_id`, `articles_categories_join`.`category_id` as `pivot_category_id` from `articles_categories` inner join `articles_categories_join` on `articles_categories`.`id` = `articles_categories_join`.`category_id` where `articles_categories_join`.`article_id` = '423'430μsbaza5943_roma
        Metadata
        Bindings
        • 0. 423
      • select * from `articles_categories` where `articles_categories`.`id` = '5' limit 1340μsbaza5943_roma
        Metadata
        Bindings
        • 0. 5
        Hints
        • Use SELECT * only if you need all columns from table
        • LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
      • select * from `attributes` where `key` in ('name') and (`table` = 'articles_categories')340μsbaza5943_roma
        Metadata
        Bindings
        • 0. name
        • 1. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '5' and `lang` = 'pl'370μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 5
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where `articles_categories`.`id` = '2' limit 1350μsbaza5943_roma
        Metadata
        Bindings
        • 0. 2
        Hints
        • Use SELECT * only if you need all columns from table
        • LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
      • select * from `articles_photos` where `article_id` = '423'480μsbaza5943_roma
        Metadata
        Bindings
        • 0. 423
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_photos')360μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_photos
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '5' and `entity_id` = '6127' and `lang` = 'pl'400μsbaza5943_roma
        Metadata
        Bindings
        • 0. 5
        • 1. 6127
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_photos')340μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_photos
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '5' and `entity_id` = '6128' and `lang` = 'pl'400μsbaza5943_roma
        Metadata
        Bindings
        • 0. 5
        • 1. 6128
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_photos')340μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_photos
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '5' and `entity_id` = '6129' and `lang` = 'pl'390μsbaza5943_roma
        Metadata
        Bindings
        • 0. 5
        • 1. 6129
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_photos')360μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_photos
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '5' and `entity_id` = '6130' and `lang` = 'pl'650μsbaza5943_roma
        Metadata
        Bindings
        • 0. 5
        • 1. 6130
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_photos')690μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_photos
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '5' and `entity_id` = '6131' and `lang` = 'pl'330μsbaza5943_roma
        Metadata
        Bindings
        • 0. 5
        • 1. 6131
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_photos')350μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_photos
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '5' and `entity_id` = '6132' and `lang` = 'pl'360μsbaza5943_roma
        Metadata
        Bindings
        • 0. 5
        • 1. 6132
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_photos')320μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_photos
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '5' and `entity_id` = '6133' and `lang` = 'pl'510μsbaza5943_roma
        Metadata
        Bindings
        • 0. 5
        • 1. 6133
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_photos')360μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_photos
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '5' and `entity_id` = '6134' and `lang` = 'pl'400μsbaza5943_roma
        Metadata
        Bindings
        • 0. 5
        • 1. 6134
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_photos')360μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_photos
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '5' and `entity_id` = '6135' and `lang` = 'pl'400μsbaza5943_roma
        Metadata
        Bindings
        • 0. 5
        • 1. 6135
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_photos')340μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_photos
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '5' and `entity_id` = '6136' and `lang` = 'pl'400μsbaza5943_roma
        Metadata
        Bindings
        • 0. 5
        • 1. 6136
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_photos')340μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_photos
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '5' and `entity_id` = '6137' and `lang` = 'pl'460μsbaza5943_roma
        Metadata
        Bindings
        • 0. 5
        • 1. 6137
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_join` where `article_id` = '423'340μsbaza5943_roma
        Metadata
        Bindings
        • 0. 423
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `id` = '151' and `status` = 'ACTIVE' and `articles`.`deleted_at` is null390μsbaza5943_roma
        Metadata
        Bindings
        • 0. 151
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles')370μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '2' and `entity_id` = '151' and `lang` = 'pl'400μsbaza5943_roma
        Metadata
        Bindings
        • 0. 2
        • 1. 151
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '3' and `entity_id` = '151' and `lang` = 'pl'530μsbaza5943_roma
        Metadata
        Bindings
        • 0. 3
        • 1. 151
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '6' and `entity_id` = '151' and `lang` = 'pl'410μsbaza5943_roma
        Metadata
        Bindings
        • 0. 6
        • 1. 151
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `urls` where `table` = 'articles' and `entity_id` = '151'380μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        • 1. 151
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `articles`.`id` = '151' and `articles`.`deleted_at` is null limit 1410μsbaza5943_roma
        Metadata
        Bindings
        • 0. 151
        Hints
        • Use SELECT * only if you need all columns from table
        • LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
      • select `articles_categories`.*, `articles_categories_join`.`article_id` as `pivot_article_id`, `articles_categories_join`.`category_id` as `pivot_category_id` from `articles_categories` inner join `articles_categories_join` on `articles_categories`.`id` = `articles_categories_join`.`category_id` where `articles_categories_join`.`article_id` = '151'400μsbaza5943_roma
        Metadata
        Bindings
        • 0. 151
      • select * from `attributes` where (`table` = 'articles_categories')380μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '17' and `lang` = 'pl'330μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 17
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `id` = '168' and `status` = 'ACTIVE' and `articles`.`deleted_at` is null770μsbaza5943_roma
        Metadata
        Bindings
        • 0. 168
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles')1.27msbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '2' and `entity_id` = '168' and `lang` = 'pl'1.17msbaza5943_roma
        Metadata
        Bindings
        • 0. 2
        • 1. 168
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '3' and `entity_id` = '168' and `lang` = 'pl'1.11msbaza5943_roma
        Metadata
        Bindings
        • 0. 3
        • 1. 168
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '6' and `entity_id` = '168' and `lang` = 'pl'420μsbaza5943_roma
        Metadata
        Bindings
        • 0. 6
        • 1. 168
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `urls` where `table` = 'articles' and `entity_id` = '168'400μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        • 1. 168
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `articles`.`id` = '168' and `articles`.`deleted_at` is null limit 1410μsbaza5943_roma
        Metadata
        Bindings
        • 0. 168
        Hints
        • Use SELECT * only if you need all columns from table
        • LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
      • select `articles_categories`.*, `articles_categories_join`.`article_id` as `pivot_article_id`, `articles_categories_join`.`category_id` as `pivot_category_id` from `articles_categories` inner join `articles_categories_join` on `articles_categories`.`id` = `articles_categories_join`.`category_id` where `articles_categories_join`.`article_id` = '168'380μsbaza5943_roma
        Metadata
        Bindings
        • 0. 168
      • select * from `attributes` where (`table` = 'articles_categories')440μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '4' and `lang` = 'pl'440μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 4
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `id` = '194' and `status` = 'ACTIVE' and `articles`.`deleted_at` is null350μsbaza5943_roma
        Metadata
        Bindings
        • 0. 194
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles')370μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '2' and `entity_id` = '194' and `lang` = 'pl'400μsbaza5943_roma
        Metadata
        Bindings
        • 0. 2
        • 1. 194
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '3' and `entity_id` = '194' and `lang` = 'pl'720μsbaza5943_roma
        Metadata
        Bindings
        • 0. 3
        • 1. 194
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '6' and `entity_id` = '194' and `lang` = 'pl'510μsbaza5943_roma
        Metadata
        Bindings
        • 0. 6
        • 1. 194
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `urls` where `table` = 'articles' and `entity_id` = '194'440μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        • 1. 194
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `id` = '218' and `status` = 'ACTIVE' and `articles`.`deleted_at` is null400μsbaza5943_roma
        Metadata
        Bindings
        • 0. 218
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles')370μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '2' and `entity_id` = '218' and `lang` = 'pl'440μsbaza5943_roma
        Metadata
        Bindings
        • 0. 2
        • 1. 218
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '3' and `entity_id` = '218' and `lang` = 'pl'490μsbaza5943_roma
        Metadata
        Bindings
        • 0. 3
        • 1. 218
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '6' and `entity_id` = '218' and `lang` = 'pl'470μsbaza5943_roma
        Metadata
        Bindings
        • 0. 6
        • 1. 218
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `urls` where `table` = 'articles' and `entity_id` = '218'440μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        • 1. 218
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `articles`.`id` = '218' and `articles`.`deleted_at` is null limit 1340μsbaza5943_roma
        Metadata
        Bindings
        • 0. 218
        Hints
        • Use SELECT * only if you need all columns from table
        • LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
      • select `articles_categories`.*, `articles_categories_join`.`article_id` as `pivot_article_id`, `articles_categories_join`.`category_id` as `pivot_category_id` from `articles_categories` inner join `articles_categories_join` on `articles_categories`.`id` = `articles_categories_join`.`category_id` where `articles_categories_join`.`article_id` = '218'440μsbaza5943_roma
        Metadata
        Bindings
        • 0. 218
      • select * from `attributes` where (`table` = 'articles_categories')340μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '12' and `lang` = 'pl'390μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 12
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `id` = '396' and `status` = 'ACTIVE' and `articles`.`deleted_at` is null390μsbaza5943_roma
        Metadata
        Bindings
        • 0. 396
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles')360μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '2' and `entity_id` = '396' and `lang` = 'pl'450μsbaza5943_roma
        Metadata
        Bindings
        • 0. 2
        • 1. 396
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '3' and `entity_id` = '396' and `lang` = 'pl'680μsbaza5943_roma
        Metadata
        Bindings
        • 0. 3
        • 1. 396
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '6' and `entity_id` = '396' and `lang` = 'pl'370μsbaza5943_roma
        Metadata
        Bindings
        • 0. 6
        • 1. 396
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `urls` where `table` = 'articles' and `entity_id` = '396'540μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        • 1. 396
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `articles`.`id` = '396' and `articles`.`deleted_at` is null limit 1320μsbaza5943_roma
        Metadata
        Bindings
        • 0. 396
        Hints
        • Use SELECT * only if you need all columns from table
        • LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
      • select `articles_categories`.*, `articles_categories_join`.`article_id` as `pivot_article_id`, `articles_categories_join`.`category_id` as `pivot_category_id` from `articles_categories` inner join `articles_categories_join` on `articles_categories`.`id` = `articles_categories_join`.`category_id` where `articles_categories_join`.`article_id` = '396'290μsbaza5943_roma
        Metadata
        Bindings
        • 0. 396
      • select * from `attributes` where (`table` = 'articles_categories')300μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '26' and `lang` = 'pl'280μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 26
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `id` = '397' and `status` = 'ACTIVE' and `articles`.`deleted_at` is null300μsbaza5943_roma
        Metadata
        Bindings
        • 0. 397
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles')270μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '2' and `entity_id` = '397' and `lang` = 'pl'270μsbaza5943_roma
        Metadata
        Bindings
        • 0. 2
        • 1. 397
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '3' and `entity_id` = '397' and `lang` = 'pl'650μsbaza5943_roma
        Metadata
        Bindings
        • 0. 3
        • 1. 397
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '6' and `entity_id` = '397' and `lang` = 'pl'400μsbaza5943_roma
        Metadata
        Bindings
        • 0. 6
        • 1. 397
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `urls` where `table` = 'articles' and `entity_id` = '397'380μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        • 1. 397
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `articles`.`id` = '397' and `articles`.`deleted_at` is null limit 1390μsbaza5943_roma
        Metadata
        Bindings
        • 0. 397
        Hints
        • Use SELECT * only if you need all columns from table
        • LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
      • select `articles_categories`.*, `articles_categories_join`.`article_id` as `pivot_article_id`, `articles_categories_join`.`category_id` as `pivot_category_id` from `articles_categories` inner join `articles_categories_join` on `articles_categories`.`id` = `articles_categories_join`.`category_id` where `articles_categories_join`.`article_id` = '397'390μsbaza5943_roma
        Metadata
        Bindings
        • 0. 397
      • select * from `attributes` where (`table` = 'articles_categories')390μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '5' and `lang` = 'pl'350μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 5
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `id` = '427' and `status` = 'ACTIVE' and `articles`.`deleted_at` is null420μsbaza5943_roma
        Metadata
        Bindings
        • 0. 427
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles')330μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '2' and `entity_id` = '427' and `lang` = 'pl'390μsbaza5943_roma
        Metadata
        Bindings
        • 0. 2
        • 1. 427
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '3' and `entity_id` = '427' and `lang` = 'pl'530μsbaza5943_roma
        Metadata
        Bindings
        • 0. 3
        • 1. 427
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '6' and `entity_id` = '427' and `lang` = 'pl'480μsbaza5943_roma
        Metadata
        Bindings
        • 0. 6
        • 1. 427
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `urls` where `table` = 'articles' and `entity_id` = '427'410μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        • 1. 427
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `articles`.`id` = '427' and `articles`.`deleted_at` is null limit 1330μsbaza5943_roma
        Metadata
        Bindings
        • 0. 427
        Hints
        • Use SELECT * only if you need all columns from table
        • LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
      • select `articles_categories`.*, `articles_categories_join`.`article_id` as `pivot_article_id`, `articles_categories_join`.`category_id` as `pivot_category_id` from `articles_categories` inner join `articles_categories_join` on `articles_categories`.`id` = `articles_categories_join`.`category_id` where `articles_categories_join`.`article_id` = '427'350μsbaza5943_roma
        Metadata
        Bindings
        • 0. 427
      • select * from `attributes` where (`table` = 'articles_categories')320μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '26' and `lang` = 'pl'420μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 26
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_photos` where `article_id` in ('151', '168', '194', '218', '396', '397', '427')930μsbaza5943_roma
        Metadata
        Bindings
        • 0. 151
        • 1. 168
        • 2. 194
        • 3. 218
        • 4. 396
        • 5. 397
        • 6. 427
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `settings`550μsbaza5943_roma
        Metadata
        Hints
        • Use SELECT * only if you need all columns from table
        • The SELECT statement has no WHERE clause and could examine many more rows than intended
      • select * from `articles_categories` where (`id` = '5') order by `id` asc560μsbaza5943_roma
        Metadata
        Bindings
        • 0. 5
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')370μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '5' and `lang` = 'pl'330μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 5
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `urls` where `table` = 'articles_categories' and `entity_id` = '5'350μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        • 1. 5
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`id` = '2') order by `id` asc350μsbaza5943_roma
        Metadata
        Bindings
        • 0. 2
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')330μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '2' and `lang` = 'pl'350μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 2
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `urls` where `table` = 'articles_categories' and `entity_id` = '2'350μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        • 1. 2
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`id` = '1') order by `id` asc380μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')340μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '1' and `lang` = 'pl'350μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 1
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `urls` where `table` = 'articles_categories' and `entity_id` = '1'320μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        • 1. 1
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `id` = '423' and `articles`.`deleted_at` is null350μsbaza5943_roma
        Metadata
        Bindings
        • 0. 423
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles')350μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '2' and `entity_id` = '423' and `lang` = 'pl'410μsbaza5943_roma
        Metadata
        Bindings
        • 0. 2
        • 1. 423
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '3' and `entity_id` = '423' and `lang` = 'pl'480μsbaza5943_roma
        Metadata
        Bindings
        • 0. 3
        • 1. 423
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '6' and `entity_id` = '423' and `lang` = 'pl'550μsbaza5943_roma
        Metadata
        Bindings
        • 0. 6
        • 1. 423
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `urls` where `table` = 'articles' and `entity_id` = '423'520μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        • 1. 423
        Hints
        • Use SELECT * only if you need all columns from table
        _token
        eYcu5xzZGqKovkIA5jnZ5GNOV5k5RdaYkdsAbtrT
        _previous
        array:1 [ "url" => "https://roma-nonpertutti.com/article/423/daniele-da-volterra-15091566-skazany-...
        PHPDEBUGBAR_STACK_DATA
        []
        format
        html
        content_type
        text/html; charset=UTF-8
        status_text
        OK
        status_code
        200
        request_query
        []
        request_request
        []
        request_headers
        array:19 [ "x-from-ssl" => array:1 [ 0 => "yes" ] "x-forwarded-proto" => array:1 [ 0 =...
        request_server
        array:119 [ "REDIRECT_REDIRECT_HTTPS" => "on" "REDIRECT_REDIRECT_SSL_SERVER_S_DN_CN" => "*.ibc.p...
        request_cookies
        []
        response_headers
        array:5 [ "cache-control" => array:1 [ 0 => "no-cache, private" ] "date" => array:1 [ ...
        path_info
        /article/423/daniele-da-volterra-15091566-skazany-na-wielowiekowe-posmiewisko
        session_attributes
        array:3 [ "_token" => "eYcu5xzZGqKovkIA5jnZ5GNOV5k5RdaYkdsAbtrT" "_previous" => array:1 [ "u...