Funerary Monument of Pope Gregory XV – a breath of subtle Jesuit propaganda

Pierre Le Gros, funerary monument of Pope Gregory XV and his nepot Ludovico Ludovisi, Church of Sant'Ignazio - Ludovisi Chapel

Pierre Le Gros, funerary monument of Pope Gregory XV and his nepot Ludovico Ludovisi, Church of Sant'Ignazio - Ludovisi Chapel

The majesty, grandeur, and splendor of the monument of the posthumous glory of Gregory XV cannot be expressed in words. And it would be impossible to find another similarly triumphant monument even in the papal necropolis, meaning the Basilica of San Pietro in Vaticano. It is also hard to believe that, it immortalizes the pope who had not distinguished himself in any special way, one who held power in the Vatican for merely twenty-eight months. However, the monument was to not so much immortalize him but more importantly serve another much more pragmatic purpose – a propaganda and advertising one. Indirectly, it reflected not so much the power of the deceased pope, but of someone who was afraid to lose his power.

Pierre Le Gros, funerary monument of Pope Gregory XV and his nepot Ludovico Ludovisi, Church of Sant'Ignazio - Ludovisi Chapel
Allegory of Justice (Giustizia), Camillo Rusconi, Ludovisi Chapel, Church of Sant'Ignazio
Allegory of Prudence (Prudenza), Camillo Rusconi, Ludovisi Chapel, Church of Sant'Ignazio
Medallion with the image of Cardinal Ludovico Ludovisi from the tombstone of Pope Gregory XV, Church of Sant'Ignazio
Pierre Le Gros, statue of Pope Gregory XV, fragment of the tomb of the pope and his nepot Ludovico Ludovisi, Church of Sant'Ignazio
Pierre Le Gros, tomb of Pope Gregory XV and Cardinal Ludovico Ludovisi, Church of Sant'Ignazio - Ludovisi Chapel

The majesty, grandeur, and splendor of the monument of the posthumous glory of Gregory XV cannot be expressed in words. And it would be impossible to find another similarly triumphant monument even in the papal necropolis, meaning the Basilica of San Pietro in Vaticano. It is also hard to believe that, it immortalizes the pope who had not distinguished himself in any special way, one who held power in the Vatican for merely twenty-eight months. However, the monument was to not so much immortalize him but more importantly serve another much more pragmatic purpose – a propaganda and advertising one. Indirectly, it reflected not so much the power of the deceased pope, but of someone who was afraid to lose his power.

However, before we get to that let us take a closer look at the monument itself, which actually commemorates the final resting place of two representatives of the Ludovisi family. It is located in the right nave of the Jesuit Church of Sant’Ignazio – near the main altar. It is here that a sort of a chapel was created, that can be reached from the main entrance, passing several other chapels, or through a (presently closed) side door, located on the right side of the chapel itself. In the Ludovisi Chapel, we will see a funerary monument by the wall and the allegories of virtues surrounding an oval space – Courage, Justice, Strength, and Prudence, completed by the skilled continuator of the work of Gian Lorenzo Bernini Camillo Rusconi. However, let us concentrate on the funerary monument of the pope, made out of multi-colored marble. The dominant element of the whole architectural and sculpture concept seems to be the colorful marble curtain, blue on the outside, and reddish on the inside, decorated with exceptionally rich gold fringes. Placing the monument not in a niche, as was customary for those types of creations, but with two Corinthian columns in the background, which were covered with an illusionist curtain, seems to be quite interesting – a trick that causes an illusion, that there is something hidden behind the columns – it would be enough for the curtain to fall and we would be able to see further areas of the church. We are also under the impression that we are looking at a free-standing monument.



When our eyes stop wandering and “settle down” shocked by the sheer amount of excitement, we will notice the white figures of the main protagonists of this Baroque theatre: the enthroned pope, under a baldachin, blessing the faithful, and two winged personifications which accompany him, of Fame, with trumpets in their hands, of course proclaiming the fame of the pontifex, as well as – seated below (on both sides of the papal sarcophagus) – allegories of Religion and Abundance. The snow-white statues seem to deny the laws of gravity, while the papal monument, set high above, appears to be rising, levitating even. In the lower part of the pope's funerary monument, there is a medallion with the image of the nepot – Cardinal Ludovico Ludovisi. He is accompanied by two putti supporting the curtain surrounding the portrait. One of these is putting out a torch, which symbolizes the end of the earthly journey of the cardinal.

Both the clergymen immortalized on the monument were connected with the Order of the Jesuits – Pope Gregory XV, began his career in the Jesuit Collegio Romano, and during his pontificate, he supported the Society of Jesus. On the other hand, his nephew, who at that time amassed a great fortune, was a pupil of this school and a protector of the order. Both of them surrounded themselves with Jesuits and cooperated with them closely. There was a reason that during the pontificate of Gregory XV, two Jesuits attained sainthood (Ignatius of Loyola and Francis Xavier). The Jesuits also received significant posts in the papal Curia, as well as privileges and the pope's support in their far-East missions. In 1626 the pope initiated the construction of the Church of Sant'Ignazio offering the Jesuits an exorbitant at that time amount of two hundred thousand scudos, while also not forgetting about them in his will, offering further donations. It was the dream of the cardinal to build a church, which would be a great monument to commemorate the Ludovisi family and pope Gregory XV, but also would be proof of the close ties between them and the Jesuits. This is further underlined by the inscription placed at the feet of the enthroned pope: ALTER IGNATIUM ARIS – ALTER ARAS IGNATION, which means: “One [pope Gregory XV] placed Ignatius upon the altars, while the other [cardinal Ludovisi] raised altars to honor Ignatius [of Loyola]”.



When, in his will, he ordered a monument to be erected honoring himself and the pope, the cardinal asked the Jesuits to watch over the design. However, the Ludovisi family was not interested in financing the monument, or at least they successfully avoided it for decades. It must be added, that the family's descendants no longer resided in Rome and they did not need to emphasize their importance in the city. After an embarrassing, for both sides quarrel between the order and the heirs of cardinal Ludovisi, over money that was to be shelled out for the construction of the monument the Jesuits were finally successful in "squeezing out" the appropriate amounts. This took place eighty years after the cardinal's death and nearly one hundred years after the pope's death.

It must be assumed that the Jesuits were not only driven by gratitude towards their benefactors and the founders of their church, but also by political farsightedness. At that time (the beginning of the XVIII century) dark clouds began to gather over their heads. They were reprimanded for the methods they used in the evangelization of China and on the Malabar Coast of India. They were accused by the Dominicans and Franciscans (active in those regions) of excessive adaptation of their missions to the customs of the local populace (acculturation), which would threaten the very dogmas of the faith. The Jesuits were heavily criticized from all sides, while accusations of arrogance and disobedience towards the pope came from everywhere, also from France which did not hold them in high regard. Pope Clement XI expressed dissatisfaction with the Jesuit methods and the Inquisition became interested in them. Forced into a counteroffensive, in the funerary monument of their former protector they saw a weapon, that could be used in a political manner. In honoring him, they accentuated their traditional, unbroken bond with the Holy See. It was Pope Gregory XV, who trusted their methods of running missions in India, Japan, and China, placing Francis Xavier upon the altars. This missionary gave the Church tens of thousands of new faithful. Another Jesuit, Matteo Ricci, with the support of the Holy See, successfully carried out missionary work in China "adjusting" evangelization to fit Chinese rituals. Both the monks adapted elements of local culture since such a procedure decisively aided in their mission and accelerated it.


In creating a monumental statue for “their” pope, the Jesuits placed the current pope Clement XI in a difficult situation – as the one, who had wanted de facto to put a stop to their effective and praiseworthy activities. When in truth the Society of Jesus, a faithful servant of the pope, only fulfilled his will and provided the Church not only new faithful but also material resources. This is what the allegory of Abundance (Abundantia) placed at the side of the sarcophagus, speaks of, accompanied on the other side by Religion. Their figures are a reference to the development of faith and increase in riches, which were a direct result of the cooperation between the Bishop of Rome and the Jesuit Order.

The author of the concept of the monument was the then-favored artist of the Jesuits Pierre Le Gros. The artist won over the hearts of his protectors by completing several years prior, the sculpting group entitled The Triumph of Religion Over Heresy placed in their principal church – the Il Gesù. The dynamism, expression of gestures, and virtuosity of execution of the aforementioned group resulted in the Jesuits entrusting him with subsequent commissions. In 1709 Le Gros began working on the funerary monument. The commemoration of the pope and his nepot on a single monument was a unique undertaking, one that in reality aroused much skepticism in the time of the slowly growing, but nevertheless present criticism of nepotism. However, this did not bother the Jesuits. The sculptor created not only the concept but completed most of the sculptures present in it, besides two allegories of Fame (in the upper part, with the trumpets), which were completed after 1713 by another French sculptor – Pierre-Étienne Monnot. That year a conflict developed between the Jesuits and Le Gros, and as a result, Monnot was employed. It was he who ultimately completed the monument in 1717.

This is the last such monumental funerary monument completed in Rome – a final act of the play commemorating popes, and in this case also their important protégées. Ultimately, albeit only for a brief time, the Jesuits lost this battle. Fifty years after its unveiling the order underwent dissolution and disappeared until 1814.


If you liked this article, you can help us continue to work by supporting the 
roma-nonpertutti  portal concrete — by sharing newsletters and donating even small amounts. They will help us in our further work.

You can make one-time deposits to your account:
Barbara  Kokoska BIGBPLPW  62 1160 2202 0000 0002 3744 2108
or support on a regular basis with  Patonite.pl  (lower left corner)

Know that we appreciate it very much and thank You !


496.96msRequest Duration16MBMemory UsageGET en/article/{id}/{slug?}Route
    • Booting (187.47ms)
    • Application (411.13ms)
      8 templates were rendered
      • pages.article (resources/views/pages/article.blade.php)6blade
        Params
        0
        article
        1
        photos
        2
        relatedArticles
        3
        relatedArticlesPhotos
        4
        categoryName
        5
        parentCategoryId
      • components.main-nav (resources/views/components/main-nav.blade.php)13blade
        Params
        0
        obLevel
        1
        __env
        2
        app
        3
        categories
        4
        settings
        5
        menu
        6
        errors
        7
        article
        8
        photos
        9
        relatedArticles
        10
        relatedArticlesPhotos
        11
        categoryName
        12
        parentCategoryId
      • components.category-banner (resources/views/components/category-banner.blade.php)13blade
        Params
        0
        obLevel
        1
        __env
        2
        app
        3
        categories
        4
        settings
        5
        menu
        6
        errors
        7
        article
        8
        photos
        9
        relatedArticles
        10
        relatedArticlesPhotos
        11
        categoryName
        12
        parentCategoryId
      • components.breadcrumbs (resources/views/components/breadcrumbs.blade.php)1blade
        Params
        0
        breadcrumbs
      • pages.sections.articleHeading (resources/views/pages/sections/articleHeading.blade.php)13blade
        Params
        0
        obLevel
        1
        __env
        2
        app
        3
        categories
        4
        settings
        5
        menu
        6
        errors
        7
        article
        8
        photos
        9
        relatedArticles
        10
        relatedArticlesPhotos
        11
        categoryName
        12
        parentCategoryId
      • components.check-also (resources/views/components/check-also.blade.php)13blade
        Params
        0
        obLevel
        1
        __env
        2
        app
        3
        categories
        4
        settings
        5
        menu
        6
        errors
        7
        article
        8
        photos
        9
        relatedArticles
        10
        relatedArticlesPhotos
        11
        categoryName
        12
        parentCategoryId
      • index (resources/views/index.blade.php)13blade
        Params
        0
        obLevel
        1
        __env
        2
        app
        3
        categories
        4
        settings
        5
        menu
        6
        errors
        7
        article
        8
        photos
        9
        relatedArticles
        10
        relatedArticlesPhotos
        11
        categoryName
        12
        parentCategoryId
      • components.footer (resources/views/components/footer.blade.php)19blade
        Params
        0
        obLevel
        1
        __env
        2
        app
        3
        categories
        4
        settings
        5
        menu
        6
        errors
        7
        article
        8
        photos
        9
        relatedArticles
        10
        relatedArticlesPhotos
        11
        categoryName
        12
        parentCategoryId
        13
        filesVersion
        14
        __currentLoopData
        15
        lang
        16
        loop
        17
        segments
        18
        url
      uri
      GET en/article/{id}/{slug?}
      middleware
      web
      controller
      App\Http\Controllers\ArticlesController@index
      namespace
      App\Http\Controllers
      prefix
      /en
      where
      as
      article
      file
      app/Http/Controllers/ArticlesController.php:82-170
      191 statements were executed, 78 of which were duplicated, 113 unique290.15ms
      • select * from `articles_categories` where (`parent_id` is null and `status` = 'ACTIVE')4.8msbaza5943_roma
        Metadata
        Bindings
        • 0. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')440μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '1' and `lang` = 'en'690μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 1
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '1' and `status` = 'ACTIVE')830μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')430μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '2' and `lang` = 'en'420μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 2
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '2' and `status` = 'ACTIVE')410μsbaza5943_roma
        Metadata
        Bindings
        • 0. 2
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')340μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '3' and `lang` = 'en'370μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 3
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '3' and `status` = 'ACTIVE')410μsbaza5943_roma
        Metadata
        Bindings
        • 0. 3
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')500μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '4' and `lang` = 'en'470μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 4
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '4' and `status` = 'ACTIVE')400μsbaza5943_roma
        Metadata
        Bindings
        • 0. 4
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')570μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '5' and `lang` = 'en'550μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 5
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '5' and `status` = 'ACTIVE')410μsbaza5943_roma
        Metadata
        Bindings
        • 0. 5
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')390μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '8' and `lang` = 'en'390μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 8
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '8' and `status` = 'ACTIVE')560μsbaza5943_roma
        Metadata
        Bindings
        • 0. 8
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')550μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '9' and `lang` = 'en'510μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 9
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '9' and `status` = 'ACTIVE')420μsbaza5943_roma
        Metadata
        Bindings
        • 0. 9
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')380μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '10' and `lang` = 'en'360μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 10
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '10' and `status` = 'ACTIVE')570μsbaza5943_roma
        Metadata
        Bindings
        • 0. 10
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')360μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '11' and `lang` = 'en'380μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 11
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '11' and `status` = 'ACTIVE')420μsbaza5943_roma
        Metadata
        Bindings
        • 0. 11
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')380μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '12' and `lang` = 'en'360μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 12
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '12' and `status` = 'ACTIVE')420μsbaza5943_roma
        Metadata
        Bindings
        • 0. 12
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')390μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '13' and `lang` = 'en'360μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 13
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '13' and `status` = 'ACTIVE')370μsbaza5943_roma
        Metadata
        Bindings
        • 0. 13
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')390μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '14' and `lang` = 'en'690μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 14
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '14' and `status` = 'ACTIVE')460μsbaza5943_roma
        Metadata
        Bindings
        • 0. 14
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')360μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '15' and `lang` = 'en'360μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 15
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '15' and `status` = 'ACTIVE')410μsbaza5943_roma
        Metadata
        Bindings
        • 0. 15
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')420μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '16' and `lang` = 'en'570μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 16
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '16' and `status` = 'ACTIVE')510μsbaza5943_roma
        Metadata
        Bindings
        • 0. 16
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')530μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '17' and `lang` = 'en'420μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 17
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '17' and `status` = 'ACTIVE')560μsbaza5943_roma
        Metadata
        Bindings
        • 0. 17
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')450μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '18' and `lang` = 'en'590μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 18
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '18' and `status` = 'ACTIVE')380μsbaza5943_roma
        Metadata
        Bindings
        • 0. 18
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')400μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '19' and `lang` = 'en'370μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 19
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '19' and `status` = 'ACTIVE')410μsbaza5943_roma
        Metadata
        Bindings
        • 0. 19
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')340μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '20' and `lang` = 'en'420μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 20
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '20' and `status` = 'ACTIVE')430μsbaza5943_roma
        Metadata
        Bindings
        • 0. 20
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')400μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '21' and `lang` = 'en'570μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 21
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '21' and `status` = 'ACTIVE')380μsbaza5943_roma
        Metadata
        Bindings
        • 0. 21
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')850μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '22' and `lang` = 'en'4.48msbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 22
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '22' and `status` = 'ACTIVE')520μsbaza5943_roma
        Metadata
        Bindings
        • 0. 22
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')360μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '23' and `lang` = 'en'5.21msbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 23
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '23' and `status` = 'ACTIVE')580μsbaza5943_roma
        Metadata
        Bindings
        • 0. 23
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')430μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '24' and `lang` = 'en'430μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 24
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '24' and `status` = 'ACTIVE')550μsbaza5943_roma
        Metadata
        Bindings
        • 0. 24
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')350μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '25' and `lang` = 'en'370μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 25
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '25' and `status` = 'ACTIVE')530μsbaza5943_roma
        Metadata
        Bindings
        • 0. 25
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')460μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '26' and `lang` = 'en'390μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 26
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '26' and `status` = 'ACTIVE')1.37msbaza5943_roma
        Metadata
        Bindings
        • 0. 26
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')550μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '27' and `lang` = 'en'340μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 27
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '27' and `status` = 'ACTIVE')410μsbaza5943_roma
        Metadata
        Bindings
        • 0. 27
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')670μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '28' and `lang` = 'en'810μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 28
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '28' and `status` = 'ACTIVE')410μsbaza5943_roma
        Metadata
        Bindings
        • 0. 28
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')310μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '29' and `lang` = 'en'810μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 29
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '29' and `status` = 'ACTIVE')370μsbaza5943_roma
        Metadata
        Bindings
        • 0. 29
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `settings`640μsbaza5943_roma
        Metadata
        Hints
        • Use SELECT * only if you need all columns from table
        • The SELECT statement has no WHERE clause and could examine many more rows than intended
      • select * from `articles` where `id` = '475' and `articles`.`deleted_at` is null580μsbaza5943_roma
        Metadata
        Bindings
        • 0. 475
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles')680μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '2' and `entity_id` = '475' and `lang` = 'en'3.57msbaza5943_roma
        Metadata
        Bindings
        • 0. 2
        • 1. 475
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '3' and `entity_id` = '475' and `lang` = 'en'590μsbaza5943_roma
        Metadata
        Bindings
        • 0. 3
        • 1. 475
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '6' and `entity_id` = '475' and `lang` = 'en'400μsbaza5943_roma
        Metadata
        Bindings
        • 0. 6
        • 1. 475
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `urls` where `table` = 'articles' and `entity_id` = '475'350μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        • 1. 475
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `articles`.`id` = '475' and `articles`.`deleted_at` is null limit 1360μsbaza5943_roma
        Metadata
        Bindings
        • 0. 475
        Hints
        • Use SELECT * only if you need all columns from table
        • LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
      • select `articles_categories`.*, `articles_categories_join`.`article_id` as `pivot_article_id`, `articles_categories_join`.`category_id` as `pivot_category_id` from `articles_categories` inner join `articles_categories_join` on `articles_categories`.`id` = `articles_categories_join`.`category_id` where `articles_categories_join`.`article_id` = '475'490μsbaza5943_roma
        Metadata
        Bindings
        • 0. 475
      • select * from `articles_categories` where `articles_categories`.`id` = '24' limit 1430μsbaza5943_roma
        Metadata
        Bindings
        • 0. 24
        Hints
        • Use SELECT * only if you need all columns from table
        • LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
      • select * from `attributes` where `key` in ('name') and (`table` = 'articles_categories')580μsbaza5943_roma
        Metadata
        Bindings
        • 0. name
        • 1. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '24' and `lang` = 'en'490μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 24
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where `articles_categories`.`id` = '16' limit 1450μsbaza5943_roma
        Metadata
        Bindings
        • 0. 16
        Hints
        • Use SELECT * only if you need all columns from table
        • LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
      • select * from `articles_photos` where `article_id` = '475'430μsbaza5943_roma
        Metadata
        Bindings
        • 0. 475
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_photos')570μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_photos
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '5' and `entity_id` = '6990' and `lang` = 'en'830μsbaza5943_roma
        Metadata
        Bindings
        • 0. 5
        • 1. 6990
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_photos')630μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_photos
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '5' and `entity_id` = '6991' and `lang` = 'en'630μsbaza5943_roma
        Metadata
        Bindings
        • 0. 5
        • 1. 6991
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_photos')610μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_photos
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '5' and `entity_id` = '6992' and `lang` = 'en'174.62msbaza5943_roma
        Metadata
        Bindings
        • 0. 5
        • 1. 6992
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_photos')420μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_photos
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '5' and `entity_id` = '6993' and `lang` = 'en'520μsbaza5943_roma
        Metadata
        Bindings
        • 0. 5
        • 1. 6993
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_photos')380μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_photos
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '5' and `entity_id` = '6994' and `lang` = 'en'380μsbaza5943_roma
        Metadata
        Bindings
        • 0. 5
        • 1. 6994
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_photos')560μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_photos
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '5' and `entity_id` = '6995' and `lang` = 'en'410μsbaza5943_roma
        Metadata
        Bindings
        • 0. 5
        • 1. 6995
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_join` where `article_id` = '475'560μsbaza5943_roma
        Metadata
        Bindings
        • 0. 475
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `id` = '16' and `status` = 'ACTIVE' and `articles`.`deleted_at` is null590μsbaza5943_roma
        Metadata
        Bindings
        • 0. 16
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles')390μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '2' and `entity_id` = '16' and `lang` = 'en'470μsbaza5943_roma
        Metadata
        Bindings
        • 0. 2
        • 1. 16
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '3' and `entity_id` = '16' and `lang` = 'en'540μsbaza5943_roma
        Metadata
        Bindings
        • 0. 3
        • 1. 16
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '6' and `entity_id` = '16' and `lang` = 'en'480μsbaza5943_roma
        Metadata
        Bindings
        • 0. 6
        • 1. 16
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `urls` where `table` = 'articles' and `entity_id` = '16'400μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        • 1. 16
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `articles`.`id` = '16' and `articles`.`deleted_at` is null limit 1400μsbaza5943_roma
        Metadata
        Bindings
        • 0. 16
        Hints
        • Use SELECT * only if you need all columns from table
        • LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
      • select `articles_categories`.*, `articles_categories_join`.`article_id` as `pivot_article_id`, `articles_categories_join`.`category_id` as `pivot_category_id` from `articles_categories` inner join `articles_categories_join` on `articles_categories`.`id` = `articles_categories_join`.`category_id` where `articles_categories_join`.`article_id` = '16'580μsbaza5943_roma
        Metadata
        Bindings
        • 0. 16
      • select * from `attributes` where (`table` = 'articles_categories')570μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '5' and `lang` = 'en'470μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 5
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `id` = '32' and `status` = 'ACTIVE' and `articles`.`deleted_at` is null330μsbaza5943_roma
        Metadata
        Bindings
        • 0. 32
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles')380μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '2' and `entity_id` = '32' and `lang` = 'en'350μsbaza5943_roma
        Metadata
        Bindings
        • 0. 2
        • 1. 32
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '3' and `entity_id` = '32' and `lang` = 'en'500μsbaza5943_roma
        Metadata
        Bindings
        • 0. 3
        • 1. 32
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '6' and `entity_id` = '32' and `lang` = 'en'420μsbaza5943_roma
        Metadata
        Bindings
        • 0. 6
        • 1. 32
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `urls` where `table` = 'articles' and `entity_id` = '32'410μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        • 1. 32
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `articles`.`id` = '32' and `articles`.`deleted_at` is null limit 1350μsbaza5943_roma
        Metadata
        Bindings
        • 0. 32
        Hints
        • Use SELECT * only if you need all columns from table
        • LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
      • select `articles_categories`.*, `articles_categories_join`.`article_id` as `pivot_article_id`, `articles_categories_join`.`category_id` as `pivot_category_id` from `articles_categories` inner join `articles_categories_join` on `articles_categories`.`id` = `articles_categories_join`.`category_id` where `articles_categories_join`.`article_id` = '32'410μsbaza5943_roma
        Metadata
        Bindings
        • 0. 32
      • select * from `attributes` where (`table` = 'articles_categories')360μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '18' and `lang` = 'en'420μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 18
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `id` = '77' and `status` = 'ACTIVE' and `articles`.`deleted_at` is null380μsbaza5943_roma
        Metadata
        Bindings
        • 0. 77
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles')310μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '2' and `entity_id` = '77' and `lang` = 'en'1.1msbaza5943_roma
        Metadata
        Bindings
        • 0. 2
        • 1. 77
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '3' and `entity_id` = '77' and `lang` = 'en'620μsbaza5943_roma
        Metadata
        Bindings
        • 0. 3
        • 1. 77
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '6' and `entity_id` = '77' and `lang` = 'en'530μsbaza5943_roma
        Metadata
        Bindings
        • 0. 6
        • 1. 77
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `urls` where `table` = 'articles' and `entity_id` = '77'370μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        • 1. 77
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `articles`.`id` = '77' and `articles`.`deleted_at` is null limit 1630μsbaza5943_roma
        Metadata
        Bindings
        • 0. 77
        Hints
        • Use SELECT * only if you need all columns from table
        • LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
      • select `articles_categories`.*, `articles_categories_join`.`article_id` as `pivot_article_id`, `articles_categories_join`.`category_id` as `pivot_category_id` from `articles_categories` inner join `articles_categories_join` on `articles_categories`.`id` = `articles_categories_join`.`category_id` where `articles_categories_join`.`article_id` = '77'3.7msbaza5943_roma
        Metadata
        Bindings
        • 0. 77
      • select * from `attributes` where (`table` = 'articles_categories')490μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '12' and `lang` = 'en'610μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 12
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `id` = '143' and `status` = 'ACTIVE' and `articles`.`deleted_at` is null580μsbaza5943_roma
        Metadata
        Bindings
        • 0. 143
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles')730μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '2' and `entity_id` = '143' and `lang` = 'en'740μsbaza5943_roma
        Metadata
        Bindings
        • 0. 2
        • 1. 143
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '3' and `entity_id` = '143' and `lang` = 'en'700μsbaza5943_roma
        Metadata
        Bindings
        • 0. 3
        • 1. 143
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '6' and `entity_id` = '143' and `lang` = 'en'680μsbaza5943_roma
        Metadata
        Bindings
        • 0. 6
        • 1. 143
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `urls` where `table` = 'articles' and `entity_id` = '143'380μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        • 1. 143
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `articles`.`id` = '143' and `articles`.`deleted_at` is null limit 1850μsbaza5943_roma
        Metadata
        Bindings
        • 0. 143
        Hints
        • Use SELECT * only if you need all columns from table
        • LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
      • select `articles_categories`.*, `articles_categories_join`.`article_id` as `pivot_article_id`, `articles_categories_join`.`category_id` as `pivot_category_id` from `articles_categories` inner join `articles_categories_join` on `articles_categories`.`id` = `articles_categories_join`.`category_id` where `articles_categories_join`.`article_id` = '143'820μsbaza5943_roma
        Metadata
        Bindings
        • 0. 143
      • select * from `attributes` where (`table` = 'articles_categories')730μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '17' and `lang` = 'en'880μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 17
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `id` = '152' and `status` = 'ACTIVE' and `articles`.`deleted_at` is null490μsbaza5943_roma
        Metadata
        Bindings
        • 0. 152
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles')320μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '2' and `entity_id` = '152' and `lang` = 'en'420μsbaza5943_roma
        Metadata
        Bindings
        • 0. 2
        • 1. 152
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '3' and `entity_id` = '152' and `lang` = 'en'470μsbaza5943_roma
        Metadata
        Bindings
        • 0. 3
        • 1. 152
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '6' and `entity_id` = '152' and `lang` = 'en'560μsbaza5943_roma
        Metadata
        Bindings
        • 0. 6
        • 1. 152
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `urls` where `table` = 'articles' and `entity_id` = '152'430μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        • 1. 152
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `articles`.`id` = '152' and `articles`.`deleted_at` is null limit 1440μsbaza5943_roma
        Metadata
        Bindings
        • 0. 152
        Hints
        • Use SELECT * only if you need all columns from table
        • LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
      • select `articles_categories`.*, `articles_categories_join`.`article_id` as `pivot_article_id`, `articles_categories_join`.`category_id` as `pivot_category_id` from `articles_categories` inner join `articles_categories_join` on `articles_categories`.`id` = `articles_categories_join`.`category_id` where `articles_categories_join`.`article_id` = '152'390μsbaza5943_roma
        Metadata
        Bindings
        • 0. 152
      • select * from `attributes` where (`table` = 'articles_categories')360μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '12' and `lang` = 'en'330μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 12
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `id` = '182' and `status` = 'ACTIVE' and `articles`.`deleted_at` is null520μsbaza5943_roma
        Metadata
        Bindings
        • 0. 182
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles')450μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '2' and `entity_id` = '182' and `lang` = 'en'350μsbaza5943_roma
        Metadata
        Bindings
        • 0. 2
        • 1. 182
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '3' and `entity_id` = '182' and `lang` = 'en'920μsbaza5943_roma
        Metadata
        Bindings
        • 0. 3
        • 1. 182
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '6' and `entity_id` = '182' and `lang` = 'en'480μsbaza5943_roma
        Metadata
        Bindings
        • 0. 6
        • 1. 182
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `urls` where `table` = 'articles' and `entity_id` = '182'470μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        • 1. 182
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `id` = '270' and `status` = 'ACTIVE' and `articles`.`deleted_at` is null400μsbaza5943_roma
        Metadata
        Bindings
        • 0. 270
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles')480μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '2' and `entity_id` = '270' and `lang` = 'en'350μsbaza5943_roma
        Metadata
        Bindings
        • 0. 2
        • 1. 270
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '3' and `entity_id` = '270' and `lang` = 'en'430μsbaza5943_roma
        Metadata
        Bindings
        • 0. 3
        • 1. 270
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '6' and `entity_id` = '270' and `lang` = 'en'490μsbaza5943_roma
        Metadata
        Bindings
        • 0. 6
        • 1. 270
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `urls` where `table` = 'articles' and `entity_id` = '270'390μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        • 1. 270
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `articles`.`id` = '270' and `articles`.`deleted_at` is null limit 12.16msbaza5943_roma
        Metadata
        Bindings
        • 0. 270
        Hints
        • Use SELECT * only if you need all columns from table
        • LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
      • select `articles_categories`.*, `articles_categories_join`.`article_id` as `pivot_article_id`, `articles_categories_join`.`category_id` as `pivot_category_id` from `articles_categories` inner join `articles_categories_join` on `articles_categories`.`id` = `articles_categories_join`.`category_id` where `articles_categories_join`.`article_id` = '270'620μsbaza5943_roma
        Metadata
        Bindings
        • 0. 270
      • select * from `attributes` where (`table` = 'articles_categories')350μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '4' and `lang` = 'en'410μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 4
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_photos` where `article_id` in ('16', '32', '77', '143', '152', '182', '270')1.25msbaza5943_roma
        Metadata
        Bindings
        • 0. 16
        • 1. 32
        • 2. 77
        • 3. 143
        • 4. 152
        • 5. 182
        • 6. 270
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `settings`470μsbaza5943_roma
        Metadata
        Hints
        • Use SELECT * only if you need all columns from table
        • The SELECT statement has no WHERE clause and could examine many more rows than intended
      • select * from `articles_categories` where (`id` = '24') order by `id` asc480μsbaza5943_roma
        Metadata
        Bindings
        • 0. 24
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')310μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '24' and `lang` = 'en'390μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 24
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `urls` where `table` = 'articles_categories' and `entity_id` = '24'900μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        • 1. 24
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`id` = '16') order by `id` asc570μsbaza5943_roma
        Metadata
        Bindings
        • 0. 16
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')880μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '16' and `lang` = 'en'360μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 16
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `urls` where `table` = 'articles_categories' and `entity_id` = '16'380μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        • 1. 16
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `id` = '475' and `articles`.`deleted_at` is null550μsbaza5943_roma
        Metadata
        Bindings
        • 0. 475
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles')390μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '2' and `entity_id` = '475' and `lang` = 'en'340μsbaza5943_roma
        Metadata
        Bindings
        • 0. 2
        • 1. 475
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '3' and `entity_id` = '475' and `lang` = 'en'580μsbaza5943_roma
        Metadata
        Bindings
        • 0. 3
        • 1. 475
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '6' and `entity_id` = '475' and `lang` = 'en'670μsbaza5943_roma
        Metadata
        Bindings
        • 0. 6
        • 1. 475
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `urls` where `table` = 'articles' and `entity_id` = '475'350μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        • 1. 475
        Hints
        • Use SELECT * only if you need all columns from table
        _token
        7rq9Rkv3Dlg2I9tfs4iwLKaQay0j1apwSPy65xLW
        _previous
        array:1 [ "url" => "https://roma-nonpertutti.com/en/article/475/the-funerary-monument-of-pope-greg...
        PHPDEBUGBAR_STACK_DATA
        []
        format
        html
        content_type
        text/html; charset=UTF-8
        status_text
        OK
        status_code
        200
        request_query
        []
        request_request
        []
        request_headers
        array:19 [ "x-from-ssl" => array:1 [ 0 => "yes" ] "x-forwarded-proto" => array:1 [ 0 =...
        request_server
        array:119 [ "REDIRECT_REDIRECT_HTTPS" => "on" "REDIRECT_REDIRECT_SSL_SERVER_S_DN_CN" => "*.ibc.p...
        request_cookies
        []
        response_headers
        array:5 [ "cache-control" => array:1 [ 0 => "no-cache, private" ] "date" => array:1 [ ...
        path_info
        /en/article/475/the-funerary-monument-of-pope-gregory-xv-a-breath-of-subtle-jesuit-propaganda
        session_attributes
        array:3 [ "_token" => "7rq9Rkv3Dlg2I9tfs4iwLKaQay0j1apwSPy65xLW" "_previous" => array:1 [ "u...