Church of Santa Caterina da Siena a Magnanapoli – a breath of Bernini’s art

Church of Santa Caterina da Siena a Magnanapoli, view of the interior

Church of Santa Caterina da Siena a Magnanapoli, view of the interior

This church located at the Quirinale, consecrated to St. Catherine of Siena, to which high steps lead today, is a beautiful example of late Baroque architecture, although its façade seems rather oafish, if not botched. However, its interior hides few very important objects, but most of all is filled with rich decorations.

Church of Santa Caterina da Siena a Magnanapoli, view of the interior
Church of Santa Caterina da Siena a Magnanapoli
Church of Santa Caterina da Siena a Magnanapoli, main alter, The Ecstasy of St. Catherine, Melchiorre Caffa
Church of Santa Caterina da Siena a Magnanapoli, The Ecstasy of St. Catherine of Siena, Melchiorre Caffa
Church of Santa Caterina da Siena a Magnanapoli, top of the main altar
Church of Santa Caterina da Siena a Magnanapoli, St. Agnes of Montepulciano, Pietro Bracci
Church of Santa Catarina da Siena a Magnanapoli, St. Rose of Lima, Pietro Bracci
Church of Santa Caterina da Siena a Magnanapoli, The Glory of St. Catherine of Siena, ceiling paintings
Church of Santa Caterina da Siena a Magnanapoli, The Glory of St. Catherine of Siena, ceiling paintings, fragment

This church located at the Quirinale, consecrated to St. Catherine of Siena, to which high steps lead today, is a beautiful example of late Baroque architecture, although its façade seems rather oafish, if not botched. However, its interior hides few very important objects, but most of all is filled with rich decorations.

 

The construction of the church began in 1608 with funds from Cardinal Scipione Borghese, the nephew of the then Pope Paul V. The design was initially entrusted to the famous Carlo Maderno, but after a few years the works were halted in a rut. They were once again taken up twenty years later, but the design was completed by another architect valued by the Borghese family – Giovanni Battista Soria. The construction was completed in 1641, while the façade itself much, much later (after 1655), which is testified to by the heraldic emblems of Pope Alexander VII (six mountains and an eight-pointed star) placed on the balustrade of the portico. The picturesque double steps leading to the church were not completed until the XX century more out of necessity than for decoration, due to the construction of via Nazionale and a general lowering of the area. During that time the square (Piazza Magnanapoli) where the church initially stood, was damaged. At that time between the two rows of steps the Crypt of the Fallen was built, devoted to Italian soldiers killed during the last two world wars.

The interior, as was often the case with churches from that time, is single-nave with chapels opening to the inside – three on each side. Their decoration as well as all of the furnishing comes mainly from the XVII and XVIII centuries. The eyes of the onlooker, are directed towards the main altar, as soon as he crosses the threshold of the church, where there is a relief made in marble and stucco The Ecstasy of St. Catherine of Siena. It is not difficult to notice the similarities with another ecstasy (The Ecstasy of St. Theresa) from the Church of Santa Maria della Vittoria, the outstanding work of Gian Lorenzo Bernini. This one here depicting St. Catherine of Siena, was created around the year 1667, meaning twenty years after Bernini’s sculpture was created, by his apprentice - Melchiorre Caffa  and it is less artful in its selection of artistic means than the original, but by no means is it bad. On the sides of the altar, we can see two other scenes, also made in stucco by another skillful imitator of Bernini, this time from the XVIII century - Pietro Bracci. They depict to saints – Rose of Lima and Agnes of Montepulciano.

 

Decorations of the ceiling add further subtlety and lightness to the interior covered in colorful marble, as with delicate stucco ornaments they open up towards the central painting showing The Glory of St. Catherine (1713), created by Luigi Garzi in a typical for rococo pastel, luminous color scheme.

  • It is also worth seeing – in the third chapel on the left – the tombstone busts completed by the talented sculptor Giuliano Finelli, depicting the married couple of Virginia and Giuseppe Bonanni (1648). They are adoring on both sides an interesting painting of a late-Baroque painter, but most importantly the biographer of the then artists – Giovanni Battista Passeri, showing Madonna del Rosario (of the Rosary) and being probably one of the best of his works.
  • We will once again come face to face with this painter on the opposite side of the church. In the Chapel of the Three Archangels (second on the right) we will notice a rare motif – the meeting of the archangels Michael, Gabriel and Raphael, who on Passeri’s painting seem to be posing for a photograph together.
  • Finishing off the sightseeing, we can also see (in the first chapel on the right) an equally rare motif – The Communion of St. Mary Magdalene by Benedetto Luti, a XVII century painter, one of the first to create the fashionable pastels. In this painting the painter’s love for gentle rococo tones and pastel colors can be fully seen.
314msRequest Duration6MBMemory UsageGET en/article/{id}/{slug?}Route
    • Booting (121.71ms)
    • Application (262.82ms)
      8 templates were rendered
      • pages.article (resources/views/pages/article.blade.php)6blade
        Params
        0
        article
        1
        photos
        2
        relatedArticles
        3
        relatedArticlesPhotos
        4
        categoryName
        5
        parentCategoryId
      • components.main-nav (resources/views/components/main-nav.blade.php)13blade
        Params
        0
        obLevel
        1
        __env
        2
        app
        3
        categories
        4
        settings
        5
        menu
        6
        errors
        7
        article
        8
        photos
        9
        relatedArticles
        10
        relatedArticlesPhotos
        11
        categoryName
        12
        parentCategoryId
      • components.category-banner (resources/views/components/category-banner.blade.php)13blade
        Params
        0
        obLevel
        1
        __env
        2
        app
        3
        categories
        4
        settings
        5
        menu
        6
        errors
        7
        article
        8
        photos
        9
        relatedArticles
        10
        relatedArticlesPhotos
        11
        categoryName
        12
        parentCategoryId
      • components.breadcrumbs (resources/views/components/breadcrumbs.blade.php)1blade
        Params
        0
        breadcrumbs
      • pages.sections.articleHeading (resources/views/pages/sections/articleHeading.blade.php)13blade
        Params
        0
        obLevel
        1
        __env
        2
        app
        3
        categories
        4
        settings
        5
        menu
        6
        errors
        7
        article
        8
        photos
        9
        relatedArticles
        10
        relatedArticlesPhotos
        11
        categoryName
        12
        parentCategoryId
      • components.check-also (resources/views/components/check-also.blade.php)13blade
        Params
        0
        obLevel
        1
        __env
        2
        app
        3
        categories
        4
        settings
        5
        menu
        6
        errors
        7
        article
        8
        photos
        9
        relatedArticles
        10
        relatedArticlesPhotos
        11
        categoryName
        12
        parentCategoryId
      • index (resources/views/index.blade.php)13blade
        Params
        0
        obLevel
        1
        __env
        2
        app
        3
        categories
        4
        settings
        5
        menu
        6
        errors
        7
        article
        8
        photos
        9
        relatedArticles
        10
        relatedArticlesPhotos
        11
        categoryName
        12
        parentCategoryId
      • components.footer (resources/views/components/footer.blade.php)19blade
        Params
        0
        obLevel
        1
        __env
        2
        app
        3
        categories
        4
        settings
        5
        menu
        6
        errors
        7
        article
        8
        photos
        9
        relatedArticles
        10
        relatedArticlesPhotos
        11
        categoryName
        12
        parentCategoryId
        13
        filesVersion
        14
        __currentLoopData
        15
        lang
        16
        loop
        17
        segments
        18
        url
      uri
      GET en/article/{id}/{slug?}
      middleware
      web
      controller
      App\Http\Controllers\ArticlesController@index
      namespace
      App\Http\Controllers
      prefix
      /en
      where
      as
      article
      file
      app/Http/Controllers/ArticlesController.php:82-170
      215 statements were executed, 88 of which were duplicated, 127 unique181.82ms
      • select * from `articles_categories` where (`parent_id` is null and `status` = 'ACTIVE')3.35msbaza5943_roma
        Metadata
        Bindings
        • 0. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')370μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '1' and `lang` = 'en'840μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 1
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '1' and `status` = 'ACTIVE')360μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')350μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '2' and `lang` = 'en'940μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 2
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '2' and `status` = 'ACTIVE')1.08msbaza5943_roma
        Metadata
        Bindings
        • 0. 2
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')1.26msbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '3' and `lang` = 'en'720μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 3
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '3' and `status` = 'ACTIVE')390μsbaza5943_roma
        Metadata
        Bindings
        • 0. 3
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')360μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '4' and `lang` = 'en'390μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 4
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '4' and `status` = 'ACTIVE')400μsbaza5943_roma
        Metadata
        Bindings
        • 0. 4
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')400μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '5' and `lang` = 'en'530μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 5
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '5' and `status` = 'ACTIVE')320μsbaza5943_roma
        Metadata
        Bindings
        • 0. 5
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')550μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '8' and `lang` = 'en'440μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 8
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '8' and `status` = 'ACTIVE')390μsbaza5943_roma
        Metadata
        Bindings
        • 0. 8
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')430μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '9' and `lang` = 'en'380μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 9
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '9' and `status` = 'ACTIVE')430μsbaza5943_roma
        Metadata
        Bindings
        • 0. 9
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')400μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '10' and `lang` = 'en'410μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 10
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '10' and `status` = 'ACTIVE')300μsbaza5943_roma
        Metadata
        Bindings
        • 0. 10
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')380μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '11' and `lang` = 'en'310μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 11
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '11' and `status` = 'ACTIVE')620μsbaza5943_roma
        Metadata
        Bindings
        • 0. 11
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')390μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '12' and `lang` = 'en'330μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 12
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '12' and `status` = 'ACTIVE')420μsbaza5943_roma
        Metadata
        Bindings
        • 0. 12
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')370μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '13' and `lang` = 'en'410μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 13
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '13' and `status` = 'ACTIVE')340μsbaza5943_roma
        Metadata
        Bindings
        • 0. 13
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')370μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '14' and `lang` = 'en'400μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 14
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '14' and `status` = 'ACTIVE')490μsbaza5943_roma
        Metadata
        Bindings
        • 0. 14
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')340μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '15' and `lang` = 'en'520μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 15
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '15' and `status` = 'ACTIVE')340μsbaza5943_roma
        Metadata
        Bindings
        • 0. 15
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')400μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '16' and `lang` = 'en'380μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 16
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '16' and `status` = 'ACTIVE')360μsbaza5943_roma
        Metadata
        Bindings
        • 0. 16
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')420μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '17' and `lang` = 'en'370μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 17
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '17' and `status` = 'ACTIVE')480μsbaza5943_roma
        Metadata
        Bindings
        • 0. 17
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')540μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '18' and `lang` = 'en'380μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 18
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '18' and `status` = 'ACTIVE')370μsbaza5943_roma
        Metadata
        Bindings
        • 0. 18
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')390μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '19' and `lang` = 'en'400μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 19
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '19' and `status` = 'ACTIVE')380μsbaza5943_roma
        Metadata
        Bindings
        • 0. 19
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')370μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '20' and `lang` = 'en'560μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 20
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '20' and `status` = 'ACTIVE')350μsbaza5943_roma
        Metadata
        Bindings
        • 0. 20
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')430μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '21' and `lang` = 'en'310μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 21
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '21' and `status` = 'ACTIVE')650μsbaza5943_roma
        Metadata
        Bindings
        • 0. 21
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')370μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '22' and `lang` = 'en'350μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 22
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '22' and `status` = 'ACTIVE')570μsbaza5943_roma
        Metadata
        Bindings
        • 0. 22
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')340μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '23' and `lang` = 'en'400μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 23
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '23' and `status` = 'ACTIVE')450μsbaza5943_roma
        Metadata
        Bindings
        • 0. 23
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')350μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '24' and `lang` = 'en'440μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 24
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '24' and `status` = 'ACTIVE')340μsbaza5943_roma
        Metadata
        Bindings
        • 0. 24
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')390μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '25' and `lang` = 'en'340μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 25
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '25' and `status` = 'ACTIVE')460μsbaza5943_roma
        Metadata
        Bindings
        • 0. 25
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')400μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '26' and `lang` = 'en'380μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 26
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '26' and `status` = 'ACTIVE')690μsbaza5943_roma
        Metadata
        Bindings
        • 0. 26
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')430μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '27' and `lang` = 'en'420μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 27
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '27' and `status` = 'ACTIVE')310μsbaza5943_roma
        Metadata
        Bindings
        • 0. 27
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')340μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '28' and `lang` = 'en'420μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 28
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '28' and `status` = 'ACTIVE')560μsbaza5943_roma
        Metadata
        Bindings
        • 0. 28
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')380μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '29' and `lang` = 'en'440μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 29
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '29' and `status` = 'ACTIVE')330μsbaza5943_roma
        Metadata
        Bindings
        • 0. 29
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `settings`390μsbaza5943_roma
        Metadata
        Hints
        • Use SELECT * only if you need all columns from table
        • The SELECT statement has no WHERE clause and could examine many more rows than intended
      • select * from `articles` where `id` = '134' and `articles`.`deleted_at` is null650μsbaza5943_roma
        Metadata
        Bindings
        • 0. 134
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles')640μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '2' and `entity_id` = '134' and `lang` = 'en'290μsbaza5943_roma
        Metadata
        Bindings
        • 0. 2
        • 1. 134
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '3' and `entity_id` = '134' and `lang` = 'en'540μsbaza5943_roma
        Metadata
        Bindings
        • 0. 3
        • 1. 134
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '6' and `entity_id` = '134' and `lang` = 'en'480μsbaza5943_roma
        Metadata
        Bindings
        • 0. 6
        • 1. 134
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `urls` where `table` = 'articles' and `entity_id` = '134'450μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        • 1. 134
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `articles`.`id` = '134' and `articles`.`deleted_at` is null limit 1450μsbaza5943_roma
        Metadata
        Bindings
        • 0. 134
        Hints
        • Use SELECT * only if you need all columns from table
        • LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
      • select `articles_categories`.*, `articles_categories_join`.`article_id` as `pivot_article_id`, `articles_categories_join`.`category_id` as `pivot_category_id` from `articles_categories` inner join `articles_categories_join` on `articles_categories`.`id` = `articles_categories_join`.`category_id` where `articles_categories_join`.`article_id` = '134'510μsbaza5943_roma
        Metadata
        Bindings
        • 0. 134
      • select * from `articles_categories` where `articles_categories`.`id` = '17' limit 1390μsbaza5943_roma
        Metadata
        Bindings
        • 0. 17
        Hints
        • Use SELECT * only if you need all columns from table
        • LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
      • select * from `attributes` where `key` in ('name') and (`table` = 'articles_categories')300μsbaza5943_roma
        Metadata
        Bindings
        • 0. name
        • 1. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '17' and `lang` = 'en'450μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 17
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where `articles_categories`.`id` = '16' limit 1430μsbaza5943_roma
        Metadata
        Bindings
        • 0. 16
        Hints
        • Use SELECT * only if you need all columns from table
        • LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
      • select * from `articles_photos` where `article_id` = '134'440μsbaza5943_roma
        Metadata
        Bindings
        • 0. 134
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_photos')480μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_photos
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '5' and `entity_id` = '2008' and `lang` = 'en'380μsbaza5943_roma
        Metadata
        Bindings
        • 0. 5
        • 1. 2008
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_photos')340μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_photos
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '5' and `entity_id` = '2009' and `lang` = 'en'520μsbaza5943_roma
        Metadata
        Bindings
        • 0. 5
        • 1. 2009
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_photos')370μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_photos
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '5' and `entity_id` = '2010' and `lang` = 'en'440μsbaza5943_roma
        Metadata
        Bindings
        • 0. 5
        • 1. 2010
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_photos')340μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_photos
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '5' and `entity_id` = '2011' and `lang` = 'en'390μsbaza5943_roma
        Metadata
        Bindings
        • 0. 5
        • 1. 2011
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_photos')360μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_photos
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '5' and `entity_id` = '2012' and `lang` = 'en'440μsbaza5943_roma
        Metadata
        Bindings
        • 0. 5
        • 1. 2012
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_photos')340μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_photos
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '5' and `entity_id` = '2013' and `lang` = 'en'400μsbaza5943_roma
        Metadata
        Bindings
        • 0. 5
        • 1. 2013
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_photos')330μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_photos
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '5' and `entity_id` = '2014' and `lang` = 'en'390μsbaza5943_roma
        Metadata
        Bindings
        • 0. 5
        • 1. 2014
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_photos')360μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_photos
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '5' and `entity_id` = '2015' and `lang` = 'en'390μsbaza5943_roma
        Metadata
        Bindings
        • 0. 5
        • 1. 2015
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_photos')360μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_photos
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '5' and `entity_id` = '2016' and `lang` = 'en'400μsbaza5943_roma
        Metadata
        Bindings
        • 0. 5
        • 1. 2016
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_photos')370μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_photos
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '5' and `entity_id` = '2017' and `lang` = 'en'340μsbaza5943_roma
        Metadata
        Bindings
        • 0. 5
        • 1. 2017
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_photos')340μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_photos
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '5' and `entity_id` = '2018' and `lang` = 'en'450μsbaza5943_roma
        Metadata
        Bindings
        • 0. 5
        • 1. 2018
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_photos')530μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_photos
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '5' and `entity_id` = '2019' and `lang` = 'en'450μsbaza5943_roma
        Metadata
        Bindings
        • 0. 5
        • 1. 2019
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_photos')470μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_photos
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '5' and `entity_id` = '2020' and `lang` = 'en'340μsbaza5943_roma
        Metadata
        Bindings
        • 0. 5
        • 1. 2020
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_photos')350μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_photos
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '5' and `entity_id` = '2021' and `lang` = 'en'320μsbaza5943_roma
        Metadata
        Bindings
        • 0. 5
        • 1. 2021
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_photos')360μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_photos
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '5' and `entity_id` = '2023' and `lang` = 'en'470μsbaza5943_roma
        Metadata
        Bindings
        • 0. 5
        • 1. 2023
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_photos')320μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_photos
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '5' and `entity_id` = '2024' and `lang` = 'en'400μsbaza5943_roma
        Metadata
        Bindings
        • 0. 5
        • 1. 2024
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_photos')330μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_photos
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '5' and `entity_id` = '2025' and `lang` = 'en'400μsbaza5943_roma
        Metadata
        Bindings
        • 0. 5
        • 1. 2025
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_photos')340μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_photos
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '5' and `entity_id` = '2026' and `lang` = 'en'420μsbaza5943_roma
        Metadata
        Bindings
        • 0. 5
        • 1. 2026
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_join` where `article_id` = '134'350μsbaza5943_roma
        Metadata
        Bindings
        • 0. 134
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `id` = '11' and `status` = 'ACTIVE' and `articles`.`deleted_at` is null350μsbaza5943_roma
        Metadata
        Bindings
        • 0. 11
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles')420μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '2' and `entity_id` = '11' and `lang` = 'en'390μsbaza5943_roma
        Metadata
        Bindings
        • 0. 2
        • 1. 11
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '3' and `entity_id` = '11' and `lang` = 'en'840μsbaza5943_roma
        Metadata
        Bindings
        • 0. 3
        • 1. 11
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '6' and `entity_id` = '11' and `lang` = 'en'370μsbaza5943_roma
        Metadata
        Bindings
        • 0. 6
        • 1. 11
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `urls` where `table` = 'articles' and `entity_id` = '11'590μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        • 1. 11
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `articles`.`id` = '11' and `articles`.`deleted_at` is null limit 1370μsbaza5943_roma
        Metadata
        Bindings
        • 0. 11
        Hints
        • Use SELECT * only if you need all columns from table
        • LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
      • select `articles_categories`.*, `articles_categories_join`.`article_id` as `pivot_article_id`, `articles_categories_join`.`category_id` as `pivot_category_id` from `articles_categories` inner join `articles_categories_join` on `articles_categories`.`id` = `articles_categories_join`.`category_id` where `articles_categories_join`.`article_id` = '11'410μsbaza5943_roma
        Metadata
        Bindings
        • 0. 11
      • select * from `attributes` where (`table` = 'articles_categories')370μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '12' and `lang` = 'en'400μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 12
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `id` = '24' and `status` = 'ACTIVE' and `articles`.`deleted_at` is null410μsbaza5943_roma
        Metadata
        Bindings
        • 0. 24
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles')300μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '2' and `entity_id` = '24' and `lang` = 'en'320μsbaza5943_roma
        Metadata
        Bindings
        • 0. 2
        • 1. 24
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '3' and `entity_id` = '24' and `lang` = 'en'1.27msbaza5943_roma
        Metadata
        Bindings
        • 0. 3
        • 1. 24
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '6' and `entity_id` = '24' and `lang` = 'en'420μsbaza5943_roma
        Metadata
        Bindings
        • 0. 6
        • 1. 24
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `urls` where `table` = 'articles' and `entity_id` = '24'380μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        • 1. 24
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `articles`.`id` = '24' and `articles`.`deleted_at` is null limit 1480μsbaza5943_roma
        Metadata
        Bindings
        • 0. 24
        Hints
        • Use SELECT * only if you need all columns from table
        • LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
      • select `articles_categories`.*, `articles_categories_join`.`article_id` as `pivot_article_id`, `articles_categories_join`.`category_id` as `pivot_category_id` from `articles_categories` inner join `articles_categories_join` on `articles_categories`.`id` = `articles_categories_join`.`category_id` where `articles_categories_join`.`article_id` = '24'390μsbaza5943_roma
        Metadata
        Bindings
        • 0. 24
      • select * from `attributes` where (`table` = 'articles_categories')620μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '12' and `lang` = 'en'850μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 12
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `id` = '27' and `status` = 'ACTIVE' and `articles`.`deleted_at` is null390μsbaza5943_roma
        Metadata
        Bindings
        • 0. 27
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles')360μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '2' and `entity_id` = '27' and `lang` = 'en'310μsbaza5943_roma
        Metadata
        Bindings
        • 0. 2
        • 1. 27
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '3' and `entity_id` = '27' and `lang` = 'en'640μsbaza5943_roma
        Metadata
        Bindings
        • 0. 3
        • 1. 27
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '6' and `entity_id` = '27' and `lang` = 'en'360μsbaza5943_roma
        Metadata
        Bindings
        • 0. 6
        • 1. 27
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `urls` where `table` = 'articles' and `entity_id` = '27'330μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        • 1. 27
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `articles`.`id` = '27' and `articles`.`deleted_at` is null limit 1290μsbaza5943_roma
        Metadata
        Bindings
        • 0. 27
        Hints
        • Use SELECT * only if you need all columns from table
        • LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
      • select `articles_categories`.*, `articles_categories_join`.`article_id` as `pivot_article_id`, `articles_categories_join`.`category_id` as `pivot_category_id` from `articles_categories` inner join `articles_categories_join` on `articles_categories`.`id` = `articles_categories_join`.`category_id` where `articles_categories_join`.`article_id` = '27'350μsbaza5943_roma
        Metadata
        Bindings
        • 0. 27
      • select * from `attributes` where (`table` = 'articles_categories')330μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '4' and `lang` = 'en'290μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 4
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `id` = '49' and `status` = 'ACTIVE' and `articles`.`deleted_at` is null410μsbaza5943_roma
        Metadata
        Bindings
        • 0. 49
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles')380μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '2' and `entity_id` = '49' and `lang` = 'en'350μsbaza5943_roma
        Metadata
        Bindings
        • 0. 2
        • 1. 49
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '3' and `entity_id` = '49' and `lang` = 'en'470μsbaza5943_roma
        Metadata
        Bindings
        • 0. 3
        • 1. 49
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '6' and `entity_id` = '49' and `lang` = 'en'450μsbaza5943_roma
        Metadata
        Bindings
        • 0. 6
        • 1. 49
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `urls` where `table` = 'articles' and `entity_id` = '49'390μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        • 1. 49
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `id` = '53' and `status` = 'ACTIVE' and `articles`.`deleted_at` is null86.33msbaza5943_roma
        Metadata
        Bindings
        • 0. 53
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles')370μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '2' and `entity_id` = '53' and `lang` = 'en'370μsbaza5943_roma
        Metadata
        Bindings
        • 0. 2
        • 1. 53
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '3' and `entity_id` = '53' and `lang` = 'en'470μsbaza5943_roma
        Metadata
        Bindings
        • 0. 3
        • 1. 53
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '6' and `entity_id` = '53' and `lang` = 'en'500μsbaza5943_roma
        Metadata
        Bindings
        • 0. 6
        • 1. 53
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `urls` where `table` = 'articles' and `entity_id` = '53'390μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        • 1. 53
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `articles`.`id` = '53' and `articles`.`deleted_at` is null limit 1360μsbaza5943_roma
        Metadata
        Bindings
        • 0. 53
        Hints
        • Use SELECT * only if you need all columns from table
        • LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
      • select `articles_categories`.*, `articles_categories_join`.`article_id` as `pivot_article_id`, `articles_categories_join`.`category_id` as `pivot_category_id` from `articles_categories` inner join `articles_categories_join` on `articles_categories`.`id` = `articles_categories_join`.`category_id` where `articles_categories_join`.`article_id` = '53'410μsbaza5943_roma
        Metadata
        Bindings
        • 0. 53
      • select * from `attributes` where (`table` = 'articles_categories')420μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '4' and `lang` = 'en'390μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 4
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `id` = '160' and `status` = 'ACTIVE' and `articles`.`deleted_at` is null390μsbaza5943_roma
        Metadata
        Bindings
        • 0. 160
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles')370μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '2' and `entity_id` = '160' and `lang` = 'en'360μsbaza5943_roma
        Metadata
        Bindings
        • 0. 2
        • 1. 160
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '3' and `entity_id` = '160' and `lang` = 'en'730μsbaza5943_roma
        Metadata
        Bindings
        • 0. 3
        • 1. 160
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '6' and `entity_id` = '160' and `lang` = 'en'380μsbaza5943_roma
        Metadata
        Bindings
        • 0. 6
        • 1. 160
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `urls` where `table` = 'articles' and `entity_id` = '160'390μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        • 1. 160
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `articles`.`id` = '160' and `articles`.`deleted_at` is null limit 1340μsbaza5943_roma
        Metadata
        Bindings
        • 0. 160
        Hints
        • Use SELECT * only if you need all columns from table
        • LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
      • select `articles_categories`.*, `articles_categories_join`.`article_id` as `pivot_article_id`, `articles_categories_join`.`category_id` as `pivot_category_id` from `articles_categories` inner join `articles_categories_join` on `articles_categories`.`id` = `articles_categories_join`.`category_id` where `articles_categories_join`.`article_id` = '160'410μsbaza5943_roma
        Metadata
        Bindings
        • 0. 160
      • select * from `attributes` where (`table` = 'articles_categories')350μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '3' and `lang` = 'en'390μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 3
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `id` = '185' and `status` = 'ACTIVE' and `articles`.`deleted_at` is null390μsbaza5943_roma
        Metadata
        Bindings
        • 0. 185
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles')360μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '2' and `entity_id` = '185' and `lang` = 'en'370μsbaza5943_roma
        Metadata
        Bindings
        • 0. 2
        • 1. 185
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '3' and `entity_id` = '185' and `lang` = 'en'690μsbaza5943_roma
        Metadata
        Bindings
        • 0. 3
        • 1. 185
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '6' and `entity_id` = '185' and `lang` = 'en'570μsbaza5943_roma
        Metadata
        Bindings
        • 0. 6
        • 1. 185
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `urls` where `table` = 'articles' and `entity_id` = '185'340μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        • 1. 185
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `articles`.`id` = '185' and `articles`.`deleted_at` is null limit 1320μsbaza5943_roma
        Metadata
        Bindings
        • 0. 185
        Hints
        • Use SELECT * only if you need all columns from table
        • LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
      • select `articles_categories`.*, `articles_categories_join`.`article_id` as `pivot_article_id`, `articles_categories_join`.`category_id` as `pivot_category_id` from `articles_categories` inner join `articles_categories_join` on `articles_categories`.`id` = `articles_categories_join`.`category_id` where `articles_categories_join`.`article_id` = '185'400μsbaza5943_roma
        Metadata
        Bindings
        • 0. 185
      • select * from `attributes` where (`table` = 'articles_categories')330μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '17' and `lang` = 'en'390μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 17
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_photos` where `article_id` in ('11', '24', '27', '49', '53', '160', '185')890μsbaza5943_roma
        Metadata
        Bindings
        • 0. 11
        • 1. 24
        • 2. 27
        • 3. 49
        • 4. 53
        • 5. 160
        • 6. 185
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `settings`350μsbaza5943_roma
        Metadata
        Hints
        • Use SELECT * only if you need all columns from table
        • The SELECT statement has no WHERE clause and could examine many more rows than intended
      • select * from `articles_categories` where (`id` = '17') order by `id` asc410μsbaza5943_roma
        Metadata
        Bindings
        • 0. 17
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')310μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '17' and `lang` = 'en'680μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 17
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `urls` where `table` = 'articles_categories' and `entity_id` = '17'920μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        • 1. 17
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`id` = '16') order by `id` asc340μsbaza5943_roma
        Metadata
        Bindings
        • 0. 16
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')330μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '16' and `lang` = 'en'360μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 16
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `urls` where `table` = 'articles_categories' and `entity_id` = '16'360μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        • 1. 16
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `id` = '134' and `articles`.`deleted_at` is null510μsbaza5943_roma
        Metadata
        Bindings
        • 0. 134
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles')320μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '2' and `entity_id` = '134' and `lang` = 'en'420μsbaza5943_roma
        Metadata
        Bindings
        • 0. 2
        • 1. 134
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '3' and `entity_id` = '134' and `lang` = 'en'470μsbaza5943_roma
        Metadata
        Bindings
        • 0. 3
        • 1. 134
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '6' and `entity_id` = '134' and `lang` = 'en'440μsbaza5943_roma
        Metadata
        Bindings
        • 0. 6
        • 1. 134
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `urls` where `table` = 'articles' and `entity_id` = '134'330μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        • 1. 134
        Hints
        • Use SELECT * only if you need all columns from table
        _token
        44wOolyV3lpSWR7xmihAkl5MklLqQipD2iDHWhx7
        _previous
        array:1 [ "url" => "https://roma-nonpertutti.com/en/article/134/church-of-santa-caterina-da-siena-...
        PHPDEBUGBAR_STACK_DATA
        []
        format
        html
        content_type
        text/html; charset=UTF-8
        status_text
        OK
        status_code
        200
        request_query
        []
        request_request
        []
        request_headers
        array:19 [ "x-from-ssl" => array:1 [ 0 => "yes" ] "x-forwarded-proto" => array:1 [ 0 =...
        request_server
        array:116 [ "REDIRECT_REDIRECT_HTTPS" => "on" "REDIRECT_REDIRECT_SSL_SERVER_S_DN_CN" => "*.ibc.p...
        request_cookies
        []
        response_headers
        array:5 [ "cache-control" => array:1 [ 0 => "no-cache, private" ] "date" => array:1 [ ...
        path_info
        /en/article/134/church-of-santa-caterina-da-siena-a-magnanapoli-a-breath-of-berninis-art
        session_attributes
        array:3 [ "_token" => "44wOolyV3lpSWR7xmihAkl5MklLqQipD2iDHWhx7" "_previous" => array:1 [ "u...