Madonna z Dzieciątkiem i św. Anną Carla Saraceniego – scena z życia domowego i... gołąb

Carlo Saraceni, Madonna z Dzieciątkiem i św. Anną, fragment, Galleria Nazionale d’Arte Antica, Palazzo Barberini

Carlo Saraceni, Madonna z Dzieciątkiem i św. Anną, fragment, Galleria Nazionale d’Arte Antica, Palazzo Barberini

Siedzący na kolanach matki mały chłopiec chwyta za ubranie stojącej obok staruszki, która najwyraźniej chce się uwolnić od jego rączki. Sama w dość brutalny sposób, za jedno skrzydło, trzyma w lewej dłoni gołębia. Matka podnosi palec, strofując dziecko. Skąd my to znamy? Przed nami rozgrywa się normalna scena życia domowego, w której udział biorą: babcia, matka i skory do zabawy maluch. I jedynie gołąb budzi nasz niepokój – co pragnie zrobić z nim staruszka? Zainteresować nim dziecko czy może mu go odebrać albo zanieść do kuchni i ugotować?

Carlo Saraceni, Madonna z Dzieciątkiem i św. Anną, fragment, Galleria Nazionale d’Arte Antica, Palazzo Barberini
Madonna z Dzieciątkiem i św. Anną, Carlo Saraceni, Galleria Nazionale d’Arte Antica, Palazzo Barberini, zdj. Wikipedia
Carlo Saraceni, Madonna z Dzieciątkiem i św. Anną, fragment, Galleria Nazionale d’Arte Antica, Palazzo Barberini
Madonna z Dzieciątkiem i św. Anną, Carlo Saraceni, Galleria Nazionale d’Arte Antica, Palazzo Barberini
Carlo Saraceni, Madonna z Dzieciątkiem i św. Anną, fragment, Galleria Nazionale d’Arte Antica, Palazzo Barberini
Madonna z Dzieciątkiem i św. Anną, fragment, Carlo Saraceni, Galleria Nazionale d’Arte Antica, Palazzo Barberini
Madonna z Dzieciątkiem i św. Anną, fragment, Carlo Saraceni, Galleria Nazionale d’Arte Antica, Palazzo Barberini
Fasada byłego kościoła San Simeone Profeta ai Coronari przy via dei Coronari

Siedzący na kolanach matki mały chłopiec chwyta za ubranie stojącej obok staruszki, która najwyraźniej chce się uwolnić od jego rączki. Sama w dość brutalny sposób, za jedno skrzydło, trzyma w lewej dłoni gołębia. Matka podnosi palec, strofując dziecko. Skąd my to znamy? Przed nami rozgrywa się normalna scena życia domowego, w której udział biorą: babcia, matka i skory do zabawy maluch. I jedynie gołąb budzi nasz niepokój – co pragnie zrobić z nim staruszka? Zainteresować nim dziecko czy może mu go odebrać albo zanieść do kuchni i ugotować?

Carlo Saraceni był wiernym kompanem Caravaggia. Wraz z nim wałęsał się po ciemnych ulicach Rzymu, uczestniczył w nocnych wypadach do rzymskich tawern i lupanarów, towarzyszył mu w pijaństwach i burdach. I on, podobnie jak popędliwy Lombardczyk, miał problemy z wymiarem sprawiedliwości. W 1606 roku wraz z innym malarzem, Orazio Borgiannim, stanął przed sądem, oskarżony o zbrojną napaść na Giovanniego Baglione. W aktach sprawy zaprezentowano ich jako „popleczników” Caravaggia. I jeśli nawet oskarżenia Baglionego były przesadzone, a celem obu agresorów było raczej nastraszenie nielubianego kolegi po fachu niż jego zabicie, wydarzenie to doskonale pokazuje ówczesne konflikty między artystami, jak też brutalność i intensywność wzajemnych animozji. Niewątpliwie Saraceni podziwiał swego starszego kolegę (Caravaggia), ale tym, co interesuje nas przede wszystkim, jest fakt, że przez długie lata był też zdolnym naśladowcą jego stylu, który w twórczy sposób interpretował, poszukując za każdym razem ciekawego, zaskakującego pomysłu. I nawet gdy Caravaggia od wielu lat nie było już w mieście nad Tybrem, a w roku 1610 dotarła tam wieść o jego śmierci, Saraceni pielęgnował w swoich obrazach pamięć o nim. Trudno się dziwić, sława wielkiego malarza była w Rzymie wciąż trwała, a dzieła, stylistycznie korespondujące z jego twórczością, wciąż zyskiwały poklask i grono wiernych odbiorców.


Wywodzący się z Wenecji Saraceni – znakomity kolorysta – wprowadzał jednak do swoich kompozycji elementy piękna, elegancji i harmonii, o które Caravaggio nie dbał. Zobaczymy je też w naszym obrazie. Madonna z siedzącym na jej kolanach dzieckiem nawiązuje do długiej włoskiej tradycji tego typu wizerunków. I mimo że Maria Saraceniego odwraca od nas swoje oblicze, kryje ono tę samą słodycz, jaką dostrzegamy w płótnach Rafaela, Leonarda da Vinci czy Giovanniego Belliniego. Silne światło iluminujące dziecko i jego matkę oraz kołyskę, a pozostawiające w cieniu połowę twarzy św. Anny i całą resztę obrazu, zdecydowanie przypominają jednak o wkładzie Caravaggia w artystyczny rozwój autora kompozycji. Aby wzmocnić efekt luminizmu, Saraceni umieścił Dzieciątko Jezus na tle lśniącej białej tkaniny (pieluszki?), którą Maria otula dziecko, natomiast jej delikatnie purpurowa suknia, której barwa symbolizuje miłość, ale jest też zapowiedzią cierpienia i krwi Chrystusa, harmonizuje z brązami szaty jej matki. Z kolei przykuwająca nasz wzrok biel pościeli w kolebce nawiązuje dość oczywiście do koloru całunu, w jaki przyobleczony zostanie martwy Syn Człowieczy. Wraz z pieluszką, turbanem i gołębiem tworzy ona swoisty krąg, wokół którego usytuowani zostali bohaterowie przedstawionej sceny. W kompozycji Saraceniego nie mogło zabraknąć też szlachetnej ultramaryny, która ubogaca obraz kolorystycznie i w symboliczny sposób nawiązuje do niewinności i czystości Marii. Dla jego autora bardzo ważne było bowiem wydobycie bogactwa barw i materii. Wystarczy spojrzeć na mięsiste fałdy i misterne udrapowanie zielonej kotary, na tle której – jak na tronie – siedzi Maria. A jej suknia? Czyż nie wydaje się stanowczo za duża, tylko po to, aby pokazać wyrafinowaną grę światła załamującego się na jej fałdach i wynikające stąd zróżnicowanie barw. Czemu służyć ma przerzucona przez ramię Madonny niebieska szata, podobnie zresztą jak ta, którą trzyma na ramieniu jej matka? Również one dają możność wzbogacenia kompozycji, tworząc harmonijną i nadzwyczaj bogatą kolorystycznie całość. Niezwykła jest też precyzja, z jaką namalowana została kolebka. Zajmuje znaczącą część obrazu i stanowi ważny akcent kolorystyczny, ale nie tylko. Podpatrzona została u kolegi po fachu – wspomnianego już Borgianniego.
Czy Saraceni skopiował kołyskę z obrazu zaprzyjaźnionego artysty (Święta Rodzina ze św. Elżbietą i małym Janem Chrzcicielem), czy też zaprosił go do współpracy nad własnym – nie wiemy. Tego rodzaju przysługi, jak też pożyczanie sobie rekwizytów, stanowiły proceder nader rozpowszechniony wśród ówczesnych malarzy.



O ile przedstawiona na obrazie Saraceniego piękna Madonna przywołuje skojarzenia w wizerunkami pędzla Rafaela, o tyle jej matka, św. Anna, o wyraźnie plebejskich rysach i zgrzebnej szacie, jednoznacznie przypomina postać namalowaną kilka lat wcześniej przez Caravaggia (Madonna z Chrystusem i św. Anną, 1605). To ta sama starucha w turbanie o przeoranej zmarszczkami, spalonej słońcem twarzy. Tam beznamiętnie przypatruje się, jak Maria pomaga Chrystusowi zdusić węża grzechu. Tu podnosi gołębia, przy czym ptak ten ma służyć nie zabawie, ale nauce. Według św. Pawła Duch Święty, którego symbolem jest gołębica, stanowi emanację Boga Ojca. To on zesłał swojego syna, zrodzonego z kobiety Marii (córki innej kobiety), i to dzięki Duchowi Świętemu Syn Boży stał się człowiekiem. Musimy przyznać, że malarz wykazał się dużą ekstrawagancją, malując Ducha Świętego w ten sposób. Zrobił zresztą wszystko, aby całą tę religijną scenę „uprofanować”. Duch Święty, brutalnie trzymany za skrzydło przez starą wieśniaczkę, na jaką Saraceni ucharakteryzował babkę Jezusa, to coś niespotykanego, ale ze wszech miar zamierzonego. Takie przedstawienie podkreśla ludzki wymiar Chrystusa, jego szczęśliwe dzieciństwo w otoczeniu kochającej matki i babki. Okres ten definitywnie zakończy się w momencie chrztu w Jordanie, gdy Syn Boży, który stał się człowiekiem, przyjmie chrzest pokutny głoszony przez Jana Chrzciciela. W tym momencie zstąpi na niego Duch Święty w postaci gołębicy, definitywnie kończąc „dziecięcy” okres jego życia. Duch Święty stanowi zapowiedź nowych narodzin Chrystusa i jego drogi do zbawienia ludzi, ale też cierpienia na krzyżu. Dlatego kołyska, nad którą usytuowany jest gołąb, antycypuje przyszłą chrzcielnicę i jest zapowiedzią chrztu w Jordanie. Możemy w takim razie spekulować, że Anna chce odwrócić uwagę dziecka od gołębia. Czy mówi do niego, że gołąb nie jest przeznaczony do zabawy, czy może tłumaczy, że ma ono czas, że jeszcze nie nadeszła pora spotkania z Duchem Świętym.

 


Obraz Saraceniego to ciekawa i na wskroś nietypowa scena religijna, w której Dzieciątko Jezus nie jest adorowane, ale poddawane metodom wychowawczym jak każde dziecko na świecie. Te małe ikonograficzne „rewolucje” zyskały malarzowi poklask. Nigdy nie epatował brutalnością czy nadmiernym realizmem jak Caravaggio. Tworzył jedynie sceny o nietypowym kontekście. Na ogół przeznaczone były do adoracji w zaciszu domowym, ale to płótno zostało wystawione na widok publiczny, co było zjawiskiem zdecydowanie nietypowym. Znajdowało się w kaplicy rodzinnej rodu Lancellottich dedykowanej Dziewicy i św.
Annie w maleńkim kościółku San Simeone Profeta ai Coronari przy via dei Coronari. Kościół został całkowicie przebudowany i zmodernizowany przez Orazia Lancellottiego (od 1611 kardynała), którego pałac znajdował się nieopodal i który był też zleceniodawcą Saraceniego. Kaplica miała upamiętniać zmarłego członka rodu – kardynała Scipione Lancellottiego (ongiś kardynała tytularnego kościółka) i przyjście na świat kolejnego (skądinąd jego imiennika).


Dziś, poza odnowioną w ostatnim czasie fasadą, kościółek nie istnieje. Natomiast obraz znalazł się w 1929 roku w zbiorach Galerii Barberini i stanowi z ikonograficznego punktu widzenia, ale nie tylko, jedno z najbardziej interesujących płócien swojej epoki.

 

Madonna z Dzieciątkiem i św. Anną, Carlo Saraceni, 1611, olej na płótnie, 180 x 155 cm, Galleria Nazionale d’Arte Antica, Palazzo Barberini

Jeśli spodobał Ci się ten artykuł, możesz pomóc nam w dalszej pracy, wspierając portal  roma-nonpertutti  w konkretny  sposób — udostępniając newslettery i przekazując niewielkie kwoty. One pomogą nam w dalszej pracy.

Możesz dokonać wpłat jednorazowo na konto:
Barbara  Kokoska
62 1160 2202 0000 0002 3744 2108
albo wspierać nas regularnie za pomocą  Patonite.pl  (lewy dolny róg)

Bardzo to cenimy i Dziękujemy.



230.29msRequest Duration16MBMemory UsageGET article/{id}/{slug?}Route
    • Booting (134.08ms)
    • Application (173.87ms)
      8 templates were rendered
      • pages.article (resources/views/pages/article.blade.php)6blade
        Params
        0
        article
        1
        photos
        2
        relatedArticles
        3
        relatedArticlesPhotos
        4
        categoryName
        5
        parentCategoryId
      • components.main-nav (resources/views/components/main-nav.blade.php)13blade
        Params
        0
        obLevel
        1
        __env
        2
        app
        3
        categories
        4
        settings
        5
        menu
        6
        errors
        7
        article
        8
        photos
        9
        relatedArticles
        10
        relatedArticlesPhotos
        11
        categoryName
        12
        parentCategoryId
      • components.category-banner (resources/views/components/category-banner.blade.php)13blade
        Params
        0
        obLevel
        1
        __env
        2
        app
        3
        categories
        4
        settings
        5
        menu
        6
        errors
        7
        article
        8
        photos
        9
        relatedArticles
        10
        relatedArticlesPhotos
        11
        categoryName
        12
        parentCategoryId
      • components.breadcrumbs (resources/views/components/breadcrumbs.blade.php)1blade
        Params
        0
        breadcrumbs
      • pages.sections.articleHeading (resources/views/pages/sections/articleHeading.blade.php)13blade
        Params
        0
        obLevel
        1
        __env
        2
        app
        3
        categories
        4
        settings
        5
        menu
        6
        errors
        7
        article
        8
        photos
        9
        relatedArticles
        10
        relatedArticlesPhotos
        11
        categoryName
        12
        parentCategoryId
      • components.check-also (resources/views/components/check-also.blade.php)13blade
        Params
        0
        obLevel
        1
        __env
        2
        app
        3
        categories
        4
        settings
        5
        menu
        6
        errors
        7
        article
        8
        photos
        9
        relatedArticles
        10
        relatedArticlesPhotos
        11
        categoryName
        12
        parentCategoryId
      • index (resources/views/index.blade.php)13blade
        Params
        0
        obLevel
        1
        __env
        2
        app
        3
        categories
        4
        settings
        5
        menu
        6
        errors
        7
        article
        8
        photos
        9
        relatedArticles
        10
        relatedArticlesPhotos
        11
        categoryName
        12
        parentCategoryId
      • components.footer (resources/views/components/footer.blade.php)20blade
        Params
        0
        obLevel
        1
        __env
        2
        app
        3
        categories
        4
        settings
        5
        menu
        6
        errors
        7
        article
        8
        photos
        9
        relatedArticles
        10
        relatedArticlesPhotos
        11
        categoryName
        12
        parentCategoryId
        13
        filesVersion
        14
        __currentLoopData
        15
        lang
        16
        loop
        17
        segments
        18
        url
        19
        baseUrl
      uri
      GET article/{id}/{slug?}
      middleware
      web
      controller
      App\Http\Controllers\ArticlesController@index
      namespace
      App\Http\Controllers
      prefix
      null
      where
      as
      article
      file
      app/Http/Controllers/ArticlesController.php:82-170
      190 statements were executed, 73 of which were duplicated, 117 unique91.5ms
      • select * from `articles_categories` where (`parent_id` is null and `status` = 'ACTIVE')4.33msbaza5943_roma
        Metadata
        Bindings
        • 0. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')540μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '1' and `lang` = 'pl'380μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 1
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '1' and `status` = 'ACTIVE')350μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')420μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '2' and `lang` = 'pl'440μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 2
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '2' and `status` = 'ACTIVE')360μsbaza5943_roma
        Metadata
        Bindings
        • 0. 2
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')360μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '3' and `lang` = 'pl'390μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 3
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '3' and `status` = 'ACTIVE')350μsbaza5943_roma
        Metadata
        Bindings
        • 0. 3
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')360μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '4' and `lang` = 'pl'430μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 4
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '4' and `status` = 'ACTIVE')330μsbaza5943_roma
        Metadata
        Bindings
        • 0. 4
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')390μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '5' and `lang` = 'pl'340μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 5
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '5' and `status` = 'ACTIVE')400μsbaza5943_roma
        Metadata
        Bindings
        • 0. 5
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')420μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '8' and `lang` = 'pl'350μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 8
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '8' and `status` = 'ACTIVE')360μsbaza5943_roma
        Metadata
        Bindings
        • 0. 8
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')370μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '9' and `lang` = 'pl'400μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 9
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '9' and `status` = 'ACTIVE')350μsbaza5943_roma
        Metadata
        Bindings
        • 0. 9
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')330μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '10' and `lang` = 'pl'370μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 10
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '10' and `status` = 'ACTIVE')360μsbaza5943_roma
        Metadata
        Bindings
        • 0. 10
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')350μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '11' and `lang` = 'pl'530μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 11
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '11' and `status` = 'ACTIVE')380μsbaza5943_roma
        Metadata
        Bindings
        • 0. 11
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')400μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '12' and `lang` = 'pl'310μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 12
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '12' and `status` = 'ACTIVE')460μsbaza5943_roma
        Metadata
        Bindings
        • 0. 12
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')370μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '13' and `lang` = 'pl'440μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 13
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '13' and `status` = 'ACTIVE')530μsbaza5943_roma
        Metadata
        Bindings
        • 0. 13
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')420μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '14' and `lang` = 'pl'360μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 14
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '14' and `status` = 'ACTIVE')390μsbaza5943_roma
        Metadata
        Bindings
        • 0. 14
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')370μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '15' and `lang` = 'pl'420μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 15
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '15' and `status` = 'ACTIVE')380μsbaza5943_roma
        Metadata
        Bindings
        • 0. 15
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')390μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '16' and `lang` = 'pl'410μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 16
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '16' and `status` = 'ACTIVE')410μsbaza5943_roma
        Metadata
        Bindings
        • 0. 16
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')470μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '17' and `lang` = 'pl'380μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 17
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '17' and `status` = 'ACTIVE')320μsbaza5943_roma
        Metadata
        Bindings
        • 0. 17
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')460μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '18' and `lang` = 'pl'400μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 18
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '18' and `status` = 'ACTIVE')470μsbaza5943_roma
        Metadata
        Bindings
        • 0. 18
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')470μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '19' and `lang` = 'pl'480μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 19
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '19' and `status` = 'ACTIVE')460μsbaza5943_roma
        Metadata
        Bindings
        • 0. 19
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')380μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '20' and `lang` = 'pl'440μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 20
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '20' and `status` = 'ACTIVE')470μsbaza5943_roma
        Metadata
        Bindings
        • 0. 20
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')370μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '21' and `lang` = 'pl'420μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 21
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '21' and `status` = 'ACTIVE')380μsbaza5943_roma
        Metadata
        Bindings
        • 0. 21
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')420μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '22' and `lang` = 'pl'610μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 22
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '22' and `status` = 'ACTIVE')2.14msbaza5943_roma
        Metadata
        Bindings
        • 0. 22
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')1.16msbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '23' and `lang` = 'pl'430μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 23
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '23' and `status` = 'ACTIVE')380μsbaza5943_roma
        Metadata
        Bindings
        • 0. 23
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')400μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '24' and `lang` = 'pl'530μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 24
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '24' and `status` = 'ACTIVE')400μsbaza5943_roma
        Metadata
        Bindings
        • 0. 24
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')400μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '25' and `lang` = 'pl'470μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 25
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '25' and `status` = 'ACTIVE')410μsbaza5943_roma
        Metadata
        Bindings
        • 0. 25
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')430μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '26' and `lang` = 'pl'590μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 26
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '26' and `status` = 'ACTIVE')370μsbaza5943_roma
        Metadata
        Bindings
        • 0. 26
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')330μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '27' and `lang` = 'pl'480μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 27
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '27' and `status` = 'ACTIVE')400μsbaza5943_roma
        Metadata
        Bindings
        • 0. 27
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')400μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '28' and `lang` = 'pl'350μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 28
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '28' and `status` = 'ACTIVE')630μsbaza5943_roma
        Metadata
        Bindings
        • 0. 28
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')580μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '29' and `lang` = 'pl'500μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 29
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '29' and `status` = 'ACTIVE')430μsbaza5943_roma
        Metadata
        Bindings
        • 0. 29
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `settings`370μsbaza5943_roma
        Metadata
        Hints
        • Use SELECT * only if you need all columns from table
        • The SELECT statement has no WHERE clause and could examine many more rows than intended
      • select * from `articles` where `id` = '477' and `articles`.`deleted_at` is null1.11msbaza5943_roma
        Metadata
        Bindings
        • 0. 477
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles')1.05msbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '2' and `entity_id` = '477' and `lang` = 'pl'820μsbaza5943_roma
        Metadata
        Bindings
        • 0. 2
        • 1. 477
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '3' and `entity_id` = '477' and `lang` = 'pl'680μsbaza5943_roma
        Metadata
        Bindings
        • 0. 3
        • 1. 477
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '6' and `entity_id` = '477' and `lang` = 'pl'360μsbaza5943_roma
        Metadata
        Bindings
        • 0. 6
        • 1. 477
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `urls` where `table` = 'articles' and `entity_id` = '477'380μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        • 1. 477
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `articles`.`id` = '477' and `articles`.`deleted_at` is null limit 1340μsbaza5943_roma
        Metadata
        Bindings
        • 0. 477
        Hints
        • Use SELECT * only if you need all columns from table
        • LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
      • select `articles_categories`.*, `articles_categories_join`.`article_id` as `pivot_article_id`, `articles_categories_join`.`category_id` as `pivot_category_id` from `articles_categories` inner join `articles_categories_join` on `articles_categories`.`id` = `articles_categories_join`.`category_id` where `articles_categories_join`.`article_id` = '477'830μsbaza5943_roma
        Metadata
        Bindings
        • 0. 477
      • select * from `articles_categories` where `articles_categories`.`id` = '26' limit 1520μsbaza5943_roma
        Metadata
        Bindings
        • 0. 26
        Hints
        • Use SELECT * only if you need all columns from table
        • LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
      • select * from `attributes` where `key` in ('name') and (`table` = 'articles_categories')450μsbaza5943_roma
        Metadata
        Bindings
        • 0. name
        • 1. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '26' and `lang` = 'pl'480μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 26
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_photos` where `article_id` = '477'420μsbaza5943_roma
        Metadata
        Bindings
        • 0. 477
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_photos')930μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_photos
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '5' and `entity_id` = '7017' and `lang` = 'pl'340μsbaza5943_roma
        Metadata
        Bindings
        • 0. 5
        • 1. 7017
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_photos')480μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_photos
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '5' and `entity_id` = '7018' and `lang` = 'pl'510μsbaza5943_roma
        Metadata
        Bindings
        • 0. 5
        • 1. 7018
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_photos')400μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_photos
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '5' and `entity_id` = '7019' and `lang` = 'pl'570μsbaza5943_roma
        Metadata
        Bindings
        • 0. 5
        • 1. 7019
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_photos')540μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_photos
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '5' and `entity_id` = '7020' and `lang` = 'pl'380μsbaza5943_roma
        Metadata
        Bindings
        • 0. 5
        • 1. 7020
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_photos')340μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_photos
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '5' and `entity_id` = '7021' and `lang` = 'pl'430μsbaza5943_roma
        Metadata
        Bindings
        • 0. 5
        • 1. 7021
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_photos')300μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_photos
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '5' and `entity_id` = '7022' and `lang` = 'pl'460μsbaza5943_roma
        Metadata
        Bindings
        • 0. 5
        • 1. 7022
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_photos')1.2msbaza5943_roma
        Metadata
        Bindings
        • 0. articles_photos
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '5' and `entity_id` = '7023' and `lang` = 'pl'370μsbaza5943_roma
        Metadata
        Bindings
        • 0. 5
        • 1. 7023
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_photos')320μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_photos
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '5' and `entity_id` = '7024' and `lang` = 'pl'300μsbaza5943_roma
        Metadata
        Bindings
        • 0. 5
        • 1. 7024
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_join` where `article_id` = '477'460μsbaza5943_roma
        Metadata
        Bindings
        • 0. 477
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `id` = '29' and `status` = 'ACTIVE' and `articles`.`deleted_at` is null660μsbaza5943_roma
        Metadata
        Bindings
        • 0. 29
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles')490μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '2' and `entity_id` = '29' and `lang` = 'pl'690μsbaza5943_roma
        Metadata
        Bindings
        • 0. 2
        • 1. 29
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '3' and `entity_id` = '29' and `lang` = 'pl'700μsbaza5943_roma
        Metadata
        Bindings
        • 0. 3
        • 1. 29
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '6' and `entity_id` = '29' and `lang` = 'pl'390μsbaza5943_roma
        Metadata
        Bindings
        • 0. 6
        • 1. 29
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `urls` where `table` = 'articles' and `entity_id` = '29'380μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        • 1. 29
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `articles`.`id` = '29' and `articles`.`deleted_at` is null limit 1400μsbaza5943_roma
        Metadata
        Bindings
        • 0. 29
        Hints
        • Use SELECT * only if you need all columns from table
        • LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
      • select `articles_categories`.*, `articles_categories_join`.`article_id` as `pivot_article_id`, `articles_categories_join`.`category_id` as `pivot_category_id` from `articles_categories` inner join `articles_categories_join` on `articles_categories`.`id` = `articles_categories_join`.`category_id` where `articles_categories_join`.`article_id` = '29'410μsbaza5943_roma
        Metadata
        Bindings
        • 0. 29
      • select * from `attributes` where (`table` = 'articles_categories')340μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '5' and `lang` = 'pl'440μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 5
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `id` = '72' and `status` = 'ACTIVE' and `articles`.`deleted_at` is null340μsbaza5943_roma
        Metadata
        Bindings
        • 0. 72
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles')370μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '2' and `entity_id` = '72' and `lang` = 'pl'400μsbaza5943_roma
        Metadata
        Bindings
        • 0. 2
        • 1. 72
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '3' and `entity_id` = '72' and `lang` = 'pl'510μsbaza5943_roma
        Metadata
        Bindings
        • 0. 3
        • 1. 72
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '6' and `entity_id` = '72' and `lang` = 'pl'480μsbaza5943_roma
        Metadata
        Bindings
        • 0. 6
        • 1. 72
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `urls` where `table` = 'articles' and `entity_id` = '72'380μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        • 1. 72
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `articles`.`id` = '72' and `articles`.`deleted_at` is null limit 1350μsbaza5943_roma
        Metadata
        Bindings
        • 0. 72
        Hints
        • Use SELECT * only if you need all columns from table
        • LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
      • select `articles_categories`.*, `articles_categories_join`.`article_id` as `pivot_article_id`, `articles_categories_join`.`category_id` as `pivot_category_id` from `articles_categories` inner join `articles_categories_join` on `articles_categories`.`id` = `articles_categories_join`.`category_id` where `articles_categories_join`.`article_id` = '72'420μsbaza5943_roma
        Metadata
        Bindings
        • 0. 72
      • select * from `attributes` where (`table` = 'articles_categories')330μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '5' and `lang` = 'pl'520μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 5
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `id` = '162' and `status` = 'ACTIVE' and `articles`.`deleted_at` is null340μsbaza5943_roma
        Metadata
        Bindings
        • 0. 162
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles')440μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '2' and `entity_id` = '162' and `lang` = 'pl'420μsbaza5943_roma
        Metadata
        Bindings
        • 0. 2
        • 1. 162
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '3' and `entity_id` = '162' and `lang` = 'pl'500μsbaza5943_roma
        Metadata
        Bindings
        • 0. 3
        • 1. 162
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '6' and `entity_id` = '162' and `lang` = 'pl'410μsbaza5943_roma
        Metadata
        Bindings
        • 0. 6
        • 1. 162
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `urls` where `table` = 'articles' and `entity_id` = '162'400μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        • 1. 162
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `articles`.`id` = '162' and `articles`.`deleted_at` is null limit 1370μsbaza5943_roma
        Metadata
        Bindings
        • 0. 162
        Hints
        • Use SELECT * only if you need all columns from table
        • LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
      • select `articles_categories`.*, `articles_categories_join`.`article_id` as `pivot_article_id`, `articles_categories_join`.`category_id` as `pivot_category_id` from `articles_categories` inner join `articles_categories_join` on `articles_categories`.`id` = `articles_categories_join`.`category_id` where `articles_categories_join`.`article_id` = '162'370μsbaza5943_roma
        Metadata
        Bindings
        • 0. 162
      • select * from `attributes` where (`table` = 'articles_categories')350μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '26' and `lang` = 'pl'450μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 26
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `id` = '164' and `status` = 'ACTIVE' and `articles`.`deleted_at` is null360μsbaza5943_roma
        Metadata
        Bindings
        • 0. 164
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles')330μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '2' and `entity_id` = '164' and `lang` = 'pl'440μsbaza5943_roma
        Metadata
        Bindings
        • 0. 2
        • 1. 164
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '3' and `entity_id` = '164' and `lang` = 'pl'470μsbaza5943_roma
        Metadata
        Bindings
        • 0. 3
        • 1. 164
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '6' and `entity_id` = '164' and `lang` = 'pl'470μsbaza5943_roma
        Metadata
        Bindings
        • 0. 6
        • 1. 164
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `urls` where `table` = 'articles' and `entity_id` = '164'340μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        • 1. 164
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `articles`.`id` = '164' and `articles`.`deleted_at` is null limit 1400μsbaza5943_roma
        Metadata
        Bindings
        • 0. 164
        Hints
        • Use SELECT * only if you need all columns from table
        • LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
      • select `articles_categories`.*, `articles_categories_join`.`article_id` as `pivot_article_id`, `articles_categories_join`.`category_id` as `pivot_category_id` from `articles_categories` inner join `articles_categories_join` on `articles_categories`.`id` = `articles_categories_join`.`category_id` where `articles_categories_join`.`article_id` = '164'430μsbaza5943_roma
        Metadata
        Bindings
        • 0. 164
      • select * from `attributes` where (`table` = 'articles_categories')350μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '26' and `lang` = 'pl'330μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 26
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `id` = '277' and `status` = 'ACTIVE' and `articles`.`deleted_at` is null390μsbaza5943_roma
        Metadata
        Bindings
        • 0. 277
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles')530μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '2' and `entity_id` = '277' and `lang` = 'pl'630μsbaza5943_roma
        Metadata
        Bindings
        • 0. 2
        • 1. 277
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '3' and `entity_id` = '277' and `lang` = 'pl'610μsbaza5943_roma
        Metadata
        Bindings
        • 0. 3
        • 1. 277
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '6' and `entity_id` = '277' and `lang` = 'pl'400μsbaza5943_roma
        Metadata
        Bindings
        • 0. 6
        • 1. 277
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `urls` where `table` = 'articles' and `entity_id` = '277'730μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        • 1. 277
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `articles`.`id` = '277' and `articles`.`deleted_at` is null limit 1390μsbaza5943_roma
        Metadata
        Bindings
        • 0. 277
        Hints
        • Use SELECT * only if you need all columns from table
        • LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
      • select `articles_categories`.*, `articles_categories_join`.`article_id` as `pivot_article_id`, `articles_categories_join`.`category_id` as `pivot_category_id` from `articles_categories` inner join `articles_categories_join` on `articles_categories`.`id` = `articles_categories_join`.`category_id` where `articles_categories_join`.`article_id` = '277'1.72msbaza5943_roma
        Metadata
        Bindings
        • 0. 277
      • select * from `attributes` where (`table` = 'articles_categories')380μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '5' and `lang` = 'pl'380μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 5
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `id` = '456' and `status` = 'ACTIVE' and `articles`.`deleted_at` is null390μsbaza5943_roma
        Metadata
        Bindings
        • 0. 456
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles')360μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '2' and `entity_id` = '456' and `lang` = 'pl'360μsbaza5943_roma
        Metadata
        Bindings
        • 0. 2
        • 1. 456
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '3' and `entity_id` = '456' and `lang` = 'pl'500μsbaza5943_roma
        Metadata
        Bindings
        • 0. 3
        • 1. 456
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '6' and `entity_id` = '456' and `lang` = 'pl'390μsbaza5943_roma
        Metadata
        Bindings
        • 0. 6
        • 1. 456
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `urls` where `table` = 'articles' and `entity_id` = '456'510μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        • 1. 456
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `id` = '467' and `status` = 'ACTIVE' and `articles`.`deleted_at` is null320μsbaza5943_roma
        Metadata
        Bindings
        • 0. 467
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles')330μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '2' and `entity_id` = '467' and `lang` = 'pl'450μsbaza5943_roma
        Metadata
        Bindings
        • 0. 2
        • 1. 467
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '3' and `entity_id` = '467' and `lang` = 'pl'750μsbaza5943_roma
        Metadata
        Bindings
        • 0. 3
        • 1. 467
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '6' and `entity_id` = '467' and `lang` = 'pl'560μsbaza5943_roma
        Metadata
        Bindings
        • 0. 6
        • 1. 467
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `urls` where `table` = 'articles' and `entity_id` = '467'430μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        • 1. 467
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `articles`.`id` = '467' and `articles`.`deleted_at` is null limit 1430μsbaza5943_roma
        Metadata
        Bindings
        • 0. 467
        Hints
        • Use SELECT * only if you need all columns from table
        • LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
      • select `articles_categories`.*, `articles_categories_join`.`article_id` as `pivot_article_id`, `articles_categories_join`.`category_id` as `pivot_category_id` from `articles_categories` inner join `articles_categories_join` on `articles_categories`.`id` = `articles_categories_join`.`category_id` where `articles_categories_join`.`article_id` = '467'390μsbaza5943_roma
        Metadata
        Bindings
        • 0. 467
      • select * from `attributes` where (`table` = 'articles_categories')340μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '26' and `lang` = 'pl'360μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 26
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_photos` where `article_id` in ('29', '72', '162', '164', '277', '456', '467')780μsbaza5943_roma
        Metadata
        Bindings
        • 0. 29
        • 1. 72
        • 2. 162
        • 3. 164
        • 4. 277
        • 5. 456
        • 6. 467
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `settings`350μsbaza5943_roma
        Metadata
        Hints
        • Use SELECT * only if you need all columns from table
        • The SELECT statement has no WHERE clause and could examine many more rows than intended
      • select * from `articles_categories` where (`id` = '26') order by `id` asc620μsbaza5943_roma
        Metadata
        Bindings
        • 0. 26
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')280μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '26' and `lang` = 'pl'340μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 26
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `urls` where `table` = 'articles_categories' and `entity_id` = '26'330μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        • 1. 26
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `id` = '477' and `articles`.`deleted_at` is null320μsbaza5943_roma
        Metadata
        Bindings
        • 0. 477
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles')300μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '2' and `entity_id` = '477' and `lang` = 'pl'310μsbaza5943_roma
        Metadata
        Bindings
        • 0. 2
        • 1. 477
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '3' and `entity_id` = '477' and `lang` = 'pl'600μsbaza5943_roma
        Metadata
        Bindings
        • 0. 3
        • 1. 477
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '6' and `entity_id` = '477' and `lang` = 'pl'390μsbaza5943_roma
        Metadata
        Bindings
        • 0. 6
        • 1. 477
        • 2. pl
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `urls` where `table` = 'articles' and `entity_id` = '477'330μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        • 1. 477
        Hints
        • Use SELECT * only if you need all columns from table
        _token
        bv5iVPVpxnXe8xbchXQDFA4opJu5erQViLqgbFlV
        _previous
        array:1 [ "url" => "https://roma-nonpertutti.com/article/477/madonna-z-dzieciatkiem-i-sw-anna-carl...
        PHPDEBUGBAR_STACK_DATA
        []
        format
        html
        content_type
        text/html; charset=UTF-8
        status_text
        OK
        status_code
        200
        request_query
        []
        request_request
        []
        request_headers
        array:19 [ "x-from-ssl" => array:1 [ 0 => "yes" ] "x-forwarded-proto" => array:1 [ 0 =...
        request_server
        array:119 [ "REDIRECT_REDIRECT_HTTPS" => "on" "REDIRECT_REDIRECT_SSL_SERVER_S_DN_CN" => "*.ibc.p...
        request_cookies
        []
        response_headers
        array:5 [ "cache-control" => array:1 [ 0 => "no-cache, private" ] "date" => array:1 [ ...
        path_info
        /article/477/madonna-z-dzieciatkiem-i-sw-anna-carla-saraceniego-scena-z-zycia-domowego-i-golab
        session_attributes
        array:3 [ "_token" => "bv5iVPVpxnXe8xbchXQDFA4opJu5erQViLqgbFlV" "_previous" => array:1 [ "u...