Triumphant Arch of Emperor Titus – a commemoration of triumph and defeat engraved in stone

Triumphant arch of Emperor Titus seen from the level of the present-day Church of San Lorenzo in Miranda, Forum Romanum

Triumphant arch of Emperor Titus seen from the level of the present-day Church of San Lorenzo in Miranda, Forum Romanum

This structure found at Forum Romanum is the oldest of the three preserved triumphant arches in Rome. In times of antiquity it was located at the highest point of the forum, on a road leading to the Colosseum. It does not amaze with decorations. Its, invisible at first glance reliefs, on the interior of the arch, tell a  story of one of the proudest, yet most barbaric acts of ancient Romans.

Triumphant arch of Emperor Titus seen from the level of the present-day Church of San Lorenzo in Miranda, Forum Romanum
Triumphant arch of Emperor Titus, Forum Romanum, inscription commemorating Titus and his father Emperor Vespasian
Triumphant arch of Emperor Titus, Forum Romanum
Triumphant arch of Emperor Titus, Forum Romanum
Triumphant arch of Emperor Titus, Forum Romanum, scene depicting the looting of the Temple of Jerusalem
Triumphant arch of Emperor Titus, Forum Romanum, scene depicting the entry of Titus into Rome
Triumphant arch of Emperor Titus, Forum Romanum, fragment
Triumphant arch of Emperor Titus, Forum Romanum
Triumphant arch of Emperor Titus, Forum Romanum

This structure found at Forum Romanum is the oldest of the three preserved triumphant arches in Rome. In times of antiquity it was located at the highest point of the forum, on a road leading to the Colosseum. It does not amaze with decorations. Its, invisible at first glance reliefs, on the interior of the arch, tell a  story of one of the proudest, yet most barbaric acts of ancient Romans.

 

The tradition of triumphant parades and erecting arches for this occasion goes back all the way to the times of the Republic and in truth comes from the Etruscans when a victorious leader was glorified with a celebratory procession. It began on the Field of Mars, where the hero of the triumph, passed through an arch built in his honor. He walked towards Forum Romanum in the company of Senators, officials as well as soldiers carrying war loot and leading slaves. Animals were also part of the procession in order to be sacrificed to the gods in the most important temple of the city, that devoted to Jupiter Optimus Maximus, as proof of gratitude. This tradition acquired a slightly different dimension during the times of the Empire, when the triumphant procession was solely for the emperor. Such a march was demonstrated to Romans by Emperor Titus in the year 71, although the arch itself, commemorating this event was not erected until much later (in 81 A.D.), after the death of the emperor during the reign of his brother, Emperor Domitian.

Titus made himself famous in the history of the Roman Empire by putting down an uprising of the Jews in Judea in 70 A.D., conquering and completely destroying Jerusalem, and exiling its inhabitants. These were brought to Rome as slaves, while Romans joyously took to the streets, to greet their heroic leader and admire the throngs of slaves and goods brought from the conquest. This scene can be witnessed on the reliefs adorning the arch – one of them depicts soldiers bent over under the weight of the treasures stolen from the Jerusalem temple (prior to its destruction), including ritual trumpets, seven-arm menorah and a ritual table. With pride, these were carried as gifts to the nearby Temple of Peace, which for centuries served Romans as a sort of state treasury. There they stayed for centuries, until the great robbery, which was carried out by armies of Vandals in 455 A.D. And so, one act of barbarism was supplemented by another. However, although vandalism, which got its name from among others this act, is unanimously condemned, barbaric acts are not usually associated with Romans; just the opposite – their territorial expansion is glorified as proof of strength and entrepreneurship, not giving too much thought to the fate of the conquered nations. The arch was of course a message and a warning to all those who would dare to raise up arms against the Romans. If they were to do this, they would be robbed, killed, enslaved, while their traditions would be destroyed. This was shown in an excellent way in its simplicity by the Roman poet Virgil, who wrote:

 

Roman, remember by your strength to rule

Earth's people—for your arts are to be these:

To pacify, to impose the rule of law,

To spare the conquered, battle down the proud.

On the other side of the arch we will see the enterance of the triumphant Titus. The emperor driving a quadriga is accompanied by Roman gods: the goddess of victory Victoria, the armored Virtus, symbolizing bravery in battle, as well as Honos – the personification of civic virtues, but also honor.

The inscription found on the eastern side informs, that the arch was erected by the Senate and the people of Rome to the deified Titus, the son of Vespasian, who was also included among the deities – the protoplast of the Flavian dynasty.


SENATUS POPULUSQUE ROMANUS DIVO TITO DIVI VESPASIANI F(ILIO) VESPASIANO AUGUSTO


According to the description of the Roman historian and philosopher Cassiodorus in the times of antiquity the arch was adorned (at the base) by an enormous in size statue of Emperor Titus, driving an elephant chariot.

 

For the Jews living in Rome, for centuries this was a monument of humiliation and defeat. This was the case all the way to the Middle Ages, when the arch, along with other structures at Forum Romanum, was used as an element of the fortress of the Frangipani family. Walled, it served as an entry gate until the XVI century when it became a part of nonexistent today monastery buildings at the Church of Santa Maria Nuova. It was not until the XIX century when its old appearance was restored by supplementing and reconstructing some parts. The arch served as a model for one of the most known triumphant arches found in the world – the one found in Paris which commemorates the conquest and victories of another leader – Napoleon Bonaparte.

However, this is not the end of the story of this monument of both triumph and defeat: during World War II, British soldiers of Jewish descent intended to blow it up while taking over Rome. In the end, this did not occur – barbarism, this time in a cultural sense did not take place.

224.27msRequest Duration16MBMemory UsageGET en/article/{id}/{slug?}Route
    • Booting (128.84ms)
    • Application (162.79ms)
      8 templates were rendered
      • pages.article (resources/views/pages/article.blade.php)6blade
        Params
        0
        article
        1
        photos
        2
        relatedArticles
        3
        relatedArticlesPhotos
        4
        categoryName
        5
        parentCategoryId
      • components.main-nav (resources/views/components/main-nav.blade.php)13blade
        Params
        0
        obLevel
        1
        __env
        2
        app
        3
        categories
        4
        settings
        5
        menu
        6
        errors
        7
        article
        8
        photos
        9
        relatedArticles
        10
        relatedArticlesPhotos
        11
        categoryName
        12
        parentCategoryId
      • components.category-banner (resources/views/components/category-banner.blade.php)13blade
        Params
        0
        obLevel
        1
        __env
        2
        app
        3
        categories
        4
        settings
        5
        menu
        6
        errors
        7
        article
        8
        photos
        9
        relatedArticles
        10
        relatedArticlesPhotos
        11
        categoryName
        12
        parentCategoryId
      • components.breadcrumbs (resources/views/components/breadcrumbs.blade.php)1blade
        Params
        0
        breadcrumbs
      • pages.sections.articleHeading (resources/views/pages/sections/articleHeading.blade.php)13blade
        Params
        0
        obLevel
        1
        __env
        2
        app
        3
        categories
        4
        settings
        5
        menu
        6
        errors
        7
        article
        8
        photos
        9
        relatedArticles
        10
        relatedArticlesPhotos
        11
        categoryName
        12
        parentCategoryId
      • components.check-also (resources/views/components/check-also.blade.php)13blade
        Params
        0
        obLevel
        1
        __env
        2
        app
        3
        categories
        4
        settings
        5
        menu
        6
        errors
        7
        article
        8
        photos
        9
        relatedArticles
        10
        relatedArticlesPhotos
        11
        categoryName
        12
        parentCategoryId
      • index (resources/views/index.blade.php)13blade
        Params
        0
        obLevel
        1
        __env
        2
        app
        3
        categories
        4
        settings
        5
        menu
        6
        errors
        7
        article
        8
        photos
        9
        relatedArticles
        10
        relatedArticlesPhotos
        11
        categoryName
        12
        parentCategoryId
      • components.footer (resources/views/components/footer.blade.php)19blade
        Params
        0
        obLevel
        1
        __env
        2
        app
        3
        categories
        4
        settings
        5
        menu
        6
        errors
        7
        article
        8
        photos
        9
        relatedArticles
        10
        relatedArticlesPhotos
        11
        categoryName
        12
        parentCategoryId
        13
        filesVersion
        14
        __currentLoopData
        15
        lang
        16
        loop
        17
        segments
        18
        url
      uri
      GET en/article/{id}/{slug?}
      middleware
      web
      controller
      App\Http\Controllers\ArticlesController@index
      namespace
      App\Http\Controllers
      prefix
      /en
      where
      as
      article
      file
      app/Http/Controllers/ArticlesController.php:82-170
      201 statements were executed, 81 of which were duplicated, 120 unique81.02ms
      • select * from `articles_categories` where (`parent_id` is null and `status` = 'ACTIVE')4.2msbaza5943_roma
        Metadata
        Bindings
        • 0. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')360μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '1' and `lang` = 'en'350μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 1
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '1' and `status` = 'ACTIVE')360μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')330μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '2' and `lang` = 'en'310μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 2
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '2' and `status` = 'ACTIVE')430μsbaza5943_roma
        Metadata
        Bindings
        • 0. 2
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')340μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '3' and `lang` = 'en'360μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 3
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '3' and `status` = 'ACTIVE')350μsbaza5943_roma
        Metadata
        Bindings
        • 0. 3
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')550μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '4' and `lang` = 'en'400μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 4
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '4' and `status` = 'ACTIVE')340μsbaza5943_roma
        Metadata
        Bindings
        • 0. 4
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')400μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '5' and `lang` = 'en'410μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 5
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '5' and `status` = 'ACTIVE')350μsbaza5943_roma
        Metadata
        Bindings
        • 0. 5
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')350μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '8' and `lang` = 'en'300μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 8
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '8' and `status` = 'ACTIVE')420μsbaza5943_roma
        Metadata
        Bindings
        • 0. 8
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')350μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '9' and `lang` = 'en'390μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 9
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '9' and `status` = 'ACTIVE')360μsbaza5943_roma
        Metadata
        Bindings
        • 0. 9
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')330μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '10' and `lang` = 'en'370μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 10
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '10' and `status` = 'ACTIVE')340μsbaza5943_roma
        Metadata
        Bindings
        • 0. 10
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')330μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '11' and `lang` = 'en'420μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 11
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '11' and `status` = 'ACTIVE')350μsbaza5943_roma
        Metadata
        Bindings
        • 0. 11
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')350μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '12' and `lang` = 'en'350μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 12
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '12' and `status` = 'ACTIVE')420μsbaza5943_roma
        Metadata
        Bindings
        • 0. 12
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')630μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '13' and `lang` = 'en'340μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 13
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '13' and `status` = 'ACTIVE')360μsbaza5943_roma
        Metadata
        Bindings
        • 0. 13
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')340μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '14' and `lang` = 'en'360μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 14
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '14' and `status` = 'ACTIVE')360μsbaza5943_roma
        Metadata
        Bindings
        • 0. 14
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')330μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '15' and `lang` = 'en'310μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 15
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '15' and `status` = 'ACTIVE')430μsbaza5943_roma
        Metadata
        Bindings
        • 0. 15
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')360μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '16' and `lang` = 'en'400μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 16
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '16' and `status` = 'ACTIVE')360μsbaza5943_roma
        Metadata
        Bindings
        • 0. 16
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')340μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '17' and `lang` = 'en'360μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 17
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '17' and `status` = 'ACTIVE')370μsbaza5943_roma
        Metadata
        Bindings
        • 0. 17
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')350μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '18' and `lang` = 'en'320μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 18
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '18' and `status` = 'ACTIVE')420μsbaza5943_roma
        Metadata
        Bindings
        • 0. 18
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')340μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '19' and `lang` = 'en'400μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 19
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '19' and `status` = 'ACTIVE')430μsbaza5943_roma
        Metadata
        Bindings
        • 0. 19
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')360μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '20' and `lang` = 'en'400μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 20
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '20' and `status` = 'ACTIVE')340μsbaza5943_roma
        Metadata
        Bindings
        • 0. 20
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')370μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '21' and `lang` = 'en'330μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 21
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '21' and `status` = 'ACTIVE')390μsbaza5943_roma
        Metadata
        Bindings
        • 0. 21
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')360μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '22' and `lang` = 'en'400μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 22
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '22' and `status` = 'ACTIVE')330μsbaza5943_roma
        Metadata
        Bindings
        • 0. 22
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')360μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '23' and `lang` = 'en'390μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 23
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '23' and `status` = 'ACTIVE')400μsbaza5943_roma
        Metadata
        Bindings
        • 0. 23
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')320μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '24' and `lang` = 'en'400μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 24
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '24' and `status` = 'ACTIVE')330μsbaza5943_roma
        Metadata
        Bindings
        • 0. 24
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')380μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '25' and `lang` = 'en'330μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 25
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '25' and `status` = 'ACTIVE')400μsbaza5943_roma
        Metadata
        Bindings
        • 0. 25
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')340μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '26' and `lang` = 'en'400μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 26
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '26' and `status` = 'ACTIVE')480μsbaza5943_roma
        Metadata
        Bindings
        • 0. 26
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')530μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '27' and `lang` = 'en'380μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 27
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '27' and `status` = 'ACTIVE')330μsbaza5943_roma
        Metadata
        Bindings
        • 0. 27
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')350μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '28' and `lang` = 'en'390μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 28
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '28' and `status` = 'ACTIVE')340μsbaza5943_roma
        Metadata
        Bindings
        • 0. 28
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')390μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '29' and `lang` = 'en'390μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 29
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`parent_id` = '29' and `status` = 'ACTIVE')390μsbaza5943_roma
        Metadata
        Bindings
        • 0. 29
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `settings`370μsbaza5943_roma
        Metadata
        Hints
        • Use SELECT * only if you need all columns from table
        • The SELECT statement has no WHERE clause and could examine many more rows than intended
      • select * from `articles` where `id` = '159' and `articles`.`deleted_at` is null420μsbaza5943_roma
        Metadata
        Bindings
        • 0. 159
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles')350μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '2' and `entity_id` = '159' and `lang` = 'en'340μsbaza5943_roma
        Metadata
        Bindings
        • 0. 2
        • 1. 159
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '3' and `entity_id` = '159' and `lang` = 'en'500μsbaza5943_roma
        Metadata
        Bindings
        • 0. 3
        • 1. 159
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '6' and `entity_id` = '159' and `lang` = 'en'320μsbaza5943_roma
        Metadata
        Bindings
        • 0. 6
        • 1. 159
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `urls` where `table` = 'articles' and `entity_id` = '159'380μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        • 1. 159
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `articles`.`id` = '159' and `articles`.`deleted_at` is null limit 1340μsbaza5943_roma
        Metadata
        Bindings
        • 0. 159
        Hints
        • Use SELECT * only if you need all columns from table
        • LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
      • select `articles_categories`.*, `articles_categories_join`.`article_id` as `pivot_article_id`, `articles_categories_join`.`category_id` as `pivot_category_id` from `articles_categories` inner join `articles_categories_join` on `articles_categories`.`id` = `articles_categories_join`.`category_id` where `articles_categories_join`.`article_id` = '159'410μsbaza5943_roma
        Metadata
        Bindings
        • 0. 159
      • select * from `articles_categories` where `articles_categories`.`id` = '24' limit 1350μsbaza5943_roma
        Metadata
        Bindings
        • 0. 24
        Hints
        • Use SELECT * only if you need all columns from table
        • LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
      • select * from `attributes` where `key` in ('name') and (`table` = 'articles_categories')380μsbaza5943_roma
        Metadata
        Bindings
        • 0. name
        • 1. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '24' and `lang` = 'en'390μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 24
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where `articles_categories`.`id` = '16' limit 1390μsbaza5943_roma
        Metadata
        Bindings
        • 0. 16
        Hints
        • Use SELECT * only if you need all columns from table
        • LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
      • select * from `articles_photos` where `article_id` = '159'450μsbaza5943_roma
        Metadata
        Bindings
        • 0. 159
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_photos')350μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_photos
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '5' and `entity_id` = '2654' and `lang` = 'en'340μsbaza5943_roma
        Metadata
        Bindings
        • 0. 5
        • 1. 2654
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_photos')360μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_photos
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '5' and `entity_id` = '2655' and `lang` = 'en'400μsbaza5943_roma
        Metadata
        Bindings
        • 0. 5
        • 1. 2655
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_photos')390μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_photos
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '5' and `entity_id` = '2656' and `lang` = 'en'400μsbaza5943_roma
        Metadata
        Bindings
        • 0. 5
        • 1. 2656
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_photos')350μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_photos
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '5' and `entity_id` = '2657' and `lang` = 'en'390μsbaza5943_roma
        Metadata
        Bindings
        • 0. 5
        • 1. 2657
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_photos')360μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_photos
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '5' and `entity_id` = '2658' and `lang` = 'en'400μsbaza5943_roma
        Metadata
        Bindings
        • 0. 5
        • 1. 2658
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_photos')370μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_photos
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '5' and `entity_id` = '2659' and `lang` = 'en'400μsbaza5943_roma
        Metadata
        Bindings
        • 0. 5
        • 1. 2659
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_photos')340μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_photos
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '5' and `entity_id` = '2660' and `lang` = 'en'390μsbaza5943_roma
        Metadata
        Bindings
        • 0. 5
        • 1. 2660
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_photos')370μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_photos
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '5' and `entity_id` = '2661' and `lang` = 'en'410μsbaza5943_roma
        Metadata
        Bindings
        • 0. 5
        • 1. 2661
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_photos')370μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_photos
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '5' and `entity_id` = '2662' and `lang` = 'en'370μsbaza5943_roma
        Metadata
        Bindings
        • 0. 5
        • 1. 2662
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_photos')370μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_photos
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '5' and `entity_id` = '2664' and `lang` = 'en'420μsbaza5943_roma
        Metadata
        Bindings
        • 0. 5
        • 1. 2664
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_photos')340μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_photos
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '5' and `entity_id` = '2665' and `lang` = 'en'400μsbaza5943_roma
        Metadata
        Bindings
        • 0. 5
        • 1. 2665
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_join` where `article_id` = '159'350μsbaza5943_roma
        Metadata
        Bindings
        • 0. 159
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `id` = '45' and `status` = 'ACTIVE' and `articles`.`deleted_at` is null350μsbaza5943_roma
        Metadata
        Bindings
        • 0. 45
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles')300μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '2' and `entity_id` = '45' and `lang` = 'en'310μsbaza5943_roma
        Metadata
        Bindings
        • 0. 2
        • 1. 45
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '3' and `entity_id` = '45' and `lang` = 'en'410μsbaza5943_roma
        Metadata
        Bindings
        • 0. 3
        • 1. 45
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '6' and `entity_id` = '45' and `lang` = 'en'410μsbaza5943_roma
        Metadata
        Bindings
        • 0. 6
        • 1. 45
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `urls` where `table` = 'articles' and `entity_id` = '45'390μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        • 1. 45
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `articles`.`id` = '45' and `articles`.`deleted_at` is null limit 1330μsbaza5943_roma
        Metadata
        Bindings
        • 0. 45
        Hints
        • Use SELECT * only if you need all columns from table
        • LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
      • select `articles_categories`.*, `articles_categories_join`.`article_id` as `pivot_article_id`, `articles_categories_join`.`category_id` as `pivot_category_id` from `articles_categories` inner join `articles_categories_join` on `articles_categories`.`id` = `articles_categories_join`.`category_id` where `articles_categories_join`.`article_id` = '45'410μsbaza5943_roma
        Metadata
        Bindings
        • 0. 45
      • select * from `attributes` where (`table` = 'articles_categories')340μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '9' and `lang` = 'en'420μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 9
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `id` = '46' and `status` = 'ACTIVE' and `articles`.`deleted_at` is null340μsbaza5943_roma
        Metadata
        Bindings
        • 0. 46
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles')360μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '2' and `entity_id` = '46' and `lang` = 'en'400μsbaza5943_roma
        Metadata
        Bindings
        • 0. 2
        • 1. 46
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '3' and `entity_id` = '46' and `lang` = 'en'540μsbaza5943_roma
        Metadata
        Bindings
        • 0. 3
        • 1. 46
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '6' and `entity_id` = '46' and `lang` = 'en'550μsbaza5943_roma
        Metadata
        Bindings
        • 0. 6
        • 1. 46
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `urls` where `table` = 'articles' and `entity_id` = '46'490μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        • 1. 46
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `id` = '123' and `status` = 'ACTIVE' and `articles`.`deleted_at` is null390μsbaza5943_roma
        Metadata
        Bindings
        • 0. 123
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles')370μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '2' and `entity_id` = '123' and `lang` = 'en'320μsbaza5943_roma
        Metadata
        Bindings
        • 0. 2
        • 1. 123
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '3' and `entity_id` = '123' and `lang` = 'en'730μsbaza5943_roma
        Metadata
        Bindings
        • 0. 3
        • 1. 123
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '6' and `entity_id` = '123' and `lang` = 'en'350μsbaza5943_roma
        Metadata
        Bindings
        • 0. 6
        • 1. 123
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `urls` where `table` = 'articles' and `entity_id` = '123'340μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        • 1. 123
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `articles`.`id` = '123' and `articles`.`deleted_at` is null limit 1390μsbaza5943_roma
        Metadata
        Bindings
        • 0. 123
        Hints
        • Use SELECT * only if you need all columns from table
        • LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
      • select `articles_categories`.*, `articles_categories_join`.`article_id` as `pivot_article_id`, `articles_categories_join`.`category_id` as `pivot_category_id` from `articles_categories` inner join `articles_categories_join` on `articles_categories`.`id` = `articles_categories_join`.`category_id` where `articles_categories_join`.`article_id` = '123'410μsbaza5943_roma
        Metadata
        Bindings
        • 0. 123
      • select * from `attributes` where (`table` = 'articles_categories')360μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '20' and `lang` = 'en'290μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 20
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `id` = '154' and `status` = 'ACTIVE' and `articles`.`deleted_at` is null350μsbaza5943_roma
        Metadata
        Bindings
        • 0. 154
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles')380μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '2' and `entity_id` = '154' and `lang` = 'en'360μsbaza5943_roma
        Metadata
        Bindings
        • 0. 2
        • 1. 154
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '3' and `entity_id` = '154' and `lang` = 'en'520μsbaza5943_roma
        Metadata
        Bindings
        • 0. 3
        • 1. 154
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '6' and `entity_id` = '154' and `lang` = 'en'520μsbaza5943_roma
        Metadata
        Bindings
        • 0. 6
        • 1. 154
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `urls` where `table` = 'articles' and `entity_id` = '154'340μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        • 1. 154
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `articles`.`id` = '154' and `articles`.`deleted_at` is null limit 1360μsbaza5943_roma
        Metadata
        Bindings
        • 0. 154
        Hints
        • Use SELECT * only if you need all columns from table
        • LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
      • select `articles_categories`.*, `articles_categories_join`.`article_id` as `pivot_article_id`, `articles_categories_join`.`category_id` as `pivot_category_id` from `articles_categories` inner join `articles_categories_join` on `articles_categories`.`id` = `articles_categories_join`.`category_id` where `articles_categories_join`.`article_id` = '154'330μsbaza5943_roma
        Metadata
        Bindings
        • 0. 154
      • select * from `attributes` where (`table` = 'articles_categories')360μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '24' and `lang` = 'en'380μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 24
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `id` = '155' and `status` = 'ACTIVE' and `articles`.`deleted_at` is null390μsbaza5943_roma
        Metadata
        Bindings
        • 0. 155
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles')360μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '2' and `entity_id` = '155' and `lang` = 'en'360μsbaza5943_roma
        Metadata
        Bindings
        • 0. 2
        • 1. 155
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '3' and `entity_id` = '155' and `lang` = 'en'490μsbaza5943_roma
        Metadata
        Bindings
        • 0. 3
        • 1. 155
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '6' and `entity_id` = '155' and `lang` = 'en'390μsbaza5943_roma
        Metadata
        Bindings
        • 0. 6
        • 1. 155
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `urls` where `table` = 'articles' and `entity_id` = '155'380μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        • 1. 155
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `articles`.`id` = '155' and `articles`.`deleted_at` is null limit 1530μsbaza5943_roma
        Metadata
        Bindings
        • 0. 155
        Hints
        • Use SELECT * only if you need all columns from table
        • LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
      • select `articles_categories`.*, `articles_categories_join`.`article_id` as `pivot_article_id`, `articles_categories_join`.`category_id` as `pivot_category_id` from `articles_categories` inner join `articles_categories_join` on `articles_categories`.`id` = `articles_categories_join`.`category_id` where `articles_categories_join`.`article_id` = '155'360μsbaza5943_roma
        Metadata
        Bindings
        • 0. 155
      • select * from `attributes` where (`table` = 'articles_categories')340μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '24' and `lang` = 'en'290μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 24
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `id` = '158' and `status` = 'ACTIVE' and `articles`.`deleted_at` is null330μsbaza5943_roma
        Metadata
        Bindings
        • 0. 158
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles')310μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '2' and `entity_id` = '158' and `lang` = 'en'310μsbaza5943_roma
        Metadata
        Bindings
        • 0. 2
        • 1. 158
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '3' and `entity_id` = '158' and `lang` = 'en'400μsbaza5943_roma
        Metadata
        Bindings
        • 0. 3
        • 1. 158
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '6' and `entity_id` = '158' and `lang` = 'en'430μsbaza5943_roma
        Metadata
        Bindings
        • 0. 6
        • 1. 158
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `urls` where `table` = 'articles' and `entity_id` = '158'350μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        • 1. 158
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `articles`.`id` = '158' and `articles`.`deleted_at` is null limit 1330μsbaza5943_roma
        Metadata
        Bindings
        • 0. 158
        Hints
        • Use SELECT * only if you need all columns from table
        • LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
      • select `articles_categories`.*, `articles_categories_join`.`article_id` as `pivot_article_id`, `articles_categories_join`.`category_id` as `pivot_category_id` from `articles_categories` inner join `articles_categories_join` on `articles_categories`.`id` = `articles_categories_join`.`category_id` where `articles_categories_join`.`article_id` = '158'370μsbaza5943_roma
        Metadata
        Bindings
        • 0. 158
      • select * from `attributes` where (`table` = 'articles_categories')340μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '24' and `lang` = 'en'360μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 24
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `id` = '253' and `status` = 'ACTIVE' and `articles`.`deleted_at` is null350μsbaza5943_roma
        Metadata
        Bindings
        • 0. 253
        • 1. ACTIVE
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles')400μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '2' and `entity_id` = '253' and `lang` = 'en'370μsbaza5943_roma
        Metadata
        Bindings
        • 0. 2
        • 1. 253
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '3' and `entity_id` = '253' and `lang` = 'en'380μsbaza5943_roma
        Metadata
        Bindings
        • 0. 3
        • 1. 253
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '6' and `entity_id` = '253' and `lang` = 'en'510μsbaza5943_roma
        Metadata
        Bindings
        • 0. 6
        • 1. 253
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `urls` where `table` = 'articles' and `entity_id` = '253'430μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        • 1. 253
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `articles`.`id` = '253' and `articles`.`deleted_at` is null limit 1330μsbaza5943_roma
        Metadata
        Bindings
        • 0. 253
        Hints
        • Use SELECT * only if you need all columns from table
        • LIMIT without ORDER BY causes non-deterministic results, depending on the query execution plan
      • select `articles_categories`.*, `articles_categories_join`.`article_id` as `pivot_article_id`, `articles_categories_join`.`category_id` as `pivot_category_id` from `articles_categories` inner join `articles_categories_join` on `articles_categories`.`id` = `articles_categories_join`.`category_id` where `articles_categories_join`.`article_id` = '253'370μsbaza5943_roma
        Metadata
        Bindings
        • 0. 253
      • select * from `attributes` where (`table` = 'articles_categories')340μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '25' and `lang` = 'en'380μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 25
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_photos` where `article_id` in ('45', '46', '123', '154', '155', '158', '253')630μsbaza5943_roma
        Metadata
        Bindings
        • 0. 45
        • 1. 46
        • 2. 123
        • 3. 154
        • 4. 155
        • 5. 158
        • 6. 253
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `settings`990μsbaza5943_roma
        Metadata
        Hints
        • Use SELECT * only if you need all columns from table
        • The SELECT statement has no WHERE clause and could examine many more rows than intended
      • select * from `articles_categories` where (`id` = '24') order by `id` asc370μsbaza5943_roma
        Metadata
        Bindings
        • 0. 24
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')370μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '24' and `lang` = 'en'430μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 24
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `urls` where `table` = 'articles_categories' and `entity_id` = '24'400μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        • 1. 24
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles_categories` where (`id` = '16') order by `id` asc330μsbaza5943_roma
        Metadata
        Bindings
        • 0. 16
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles_categories')360μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '1' and `entity_id` = '16' and `lang` = 'en'400μsbaza5943_roma
        Metadata
        Bindings
        • 0. 1
        • 1. 16
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `urls` where `table` = 'articles_categories' and `entity_id` = '16'340μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles_categories
        • 1. 16
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `articles` where `id` = '159' and `articles`.`deleted_at` is null400μsbaza5943_roma
        Metadata
        Bindings
        • 0. 159
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes` where (`table` = 'articles')340μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_varchar` where `attribute_id` = '2' and `entity_id` = '159' and `lang` = 'en'390μsbaza5943_roma
        Metadata
        Bindings
        • 0. 2
        • 1. 159
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '3' and `entity_id` = '159' and `lang` = 'en'460μsbaza5943_roma
        Metadata
        Bindings
        • 0. 3
        • 1. 159
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `attributes_text` where `attribute_id` = '6' and `entity_id` = '159' and `lang` = 'en'430μsbaza5943_roma
        Metadata
        Bindings
        • 0. 6
        • 1. 159
        • 2. en
        Hints
        • Use SELECT * only if you need all columns from table
      • select * from `urls` where `table` = 'articles' and `entity_id` = '159'390μsbaza5943_roma
        Metadata
        Bindings
        • 0. articles
        • 1. 159
        Hints
        • Use SELECT * only if you need all columns from table
        _token
        UG1b2WGj9PbMDrRiFDMvAHBlF0GkX43a16FKc8tb
        _previous
        array:1 [ "url" => "https://roma-nonpertutti.com/public/en/article/159/triumphant-arch-of-emperor-...
        PHPDEBUGBAR_STACK_DATA
        []
        _flash
        array:2 [ "old" => [] "new" => [] ]
        format
        html
        content_type
        text/html; charset=UTF-8
        status_text
        OK
        status_code
        200
        request_query
        []
        request_request
        []
        request_headers
        array:20 [ "x-from-ssl" => array:1 [ 0 => "yes" ] "x-forwarded-proto" => array:1 [ 0 =...
        request_server
        array:94 [ "REDIRECT_HTTPS" => "on" "REDIRECT_SSL_SERVER_S_DN_CN" => "*.ibc.pl" "REDIRECT_SSL_...
        request_cookies
        array:2 [ "XSRF-TOKEN" => "UG1b2WGj9PbMDrRiFDMvAHBlF0GkX43a16FKc8tb" "laravel_session" => "6HLuJ...
        response_headers
        array:5 [ "cache-control" => array:1 [ 0 => "no-cache, private" ] "date" => array:1 [ ...
        path_info
        /en/article/159/triumphant-arch-of-emperor-titus-a-commemoration-of-triumph-and-defeat-engraved-in-s...
        session_attributes
        array:4 [ "_token" => "UG1b2WGj9PbMDrRiFDMvAHBlF0GkX43a16FKc8tb" "_previous" => array:1 [ "u...